標題: Analysis and Design of a Single-Stage Parallel AC-to-DC Converter
作者: Li, Heng-Yi
Chen, Hung-Chi
Chang, Lon-Kou
電控工程研究所
Institute of Electrical and Control Engineering
關鍵字: AC/DC power conversion;fly back converter;power factor correction;single-stage;single-switch
公開日期: 1-十二月-2009
摘要: In this paper, a single-stage (S(2)) parallel ac-to-dc converter based on single-switch two-output boost-flyback converter is presented. The converter contains two semistages. One is the boost flyback semistage, which transfers partial input power transferred to load directly through one power flow path and has excellent self-power factor correction property when operating in discontinuous conduction mode even though the boost output is close to the peak value of the line voltage. The other one is the flyback dc-to-dc (dc/dc) semistage that provides the output regulation on another parallel power flow path. With this design, the power conversion efficiency is improved and the current stress of control switch is reduced. Furthermore, the calculation process of power distribution and bulk capacitor voltage, design equations, and design procedure for key parameters are also presented. By following the procedure, an 80 W prototype converter has been built and tested. The experimental results show that the measured line harmonic current at the worst condition complies with the IEC61000-3-2 class D limits, the maximum bulk capacitor voltage is about 415.4 V, and the maximum efficiency is about 85.8%. Hence, the proposed S(2) converter is suitable for universal input usage.
URI: http://dx.doi.org/10.1109/TPEL.2009.2023550
http://hdl.handle.net/11536/6359
ISSN: 0885-8993
DOI: 10.1109/TPEL.2009.2023550
期刊: IEEE TRANSACTIONS ON POWER ELECTRONICS
Volume: 24
Issue: 12
起始頁: 2989
結束頁: 3002
顯示於類別:期刊論文


文件中的檔案:

  1. 000273136800032.pdf

若為 zip 檔案,請下載檔案解壓縮後,用瀏覽器開啟資料夾中的 index.html 瀏覽全文。