完整後設資料紀錄
DC 欄位語言
dc.contributor.authorWu, S. D.en_US
dc.contributor.authorChou, C. P.en_US
dc.contributor.authorPeng, R. G.en_US
dc.contributor.authorLee, C. H.en_US
dc.contributor.authorWang, Y. Z.en_US
dc.date.accessioned2014-12-08T15:08:12Z-
dc.date.available2014-12-08T15:08:12Z-
dc.date.issued2009-12-01en_US
dc.identifier.issn0567-7718en_US
dc.identifier.urihttp://dx.doi.org/10.1007/s10409-009-0261-7en_US
dc.identifier.urihttp://hdl.handle.net/11536/6393-
dc.description.abstractThis study investigates the transfer of the scrape-applied method from the electrodes of a lithium battery to the membrane-electrode assembly of fuel cells, including Proton Exchange Membrane Fuel Cells and Direct Methanol Fuel Cell. Three methods are commonly used to manufacture lithium battery electrodes: the roller-applied method, the spraying-applied method, and the scrape-applied method. This study develops novel scrape-applied equipment for lithium battery electrodes. This method is novel and suitable for producing fuel cell, better than other traditional methods. In this study, the stability of coating process was tested by measuring the weight and thickness of a dry electrode. The stability and reproducibility of electrode fabrication were examined by systematic data analysis. Finally, the study used a specially designed single cell composed of 16 conductive segments, which are insulated locally. The current passing through each segment was measured using Hall Effect sensors connected to the segment compartments. Based on the measured distribution of the local current in a segmented single cell, the influence of flooding and stoichiometry variation of feed gas was discussed in terms of electrochemical reaction rate. The experimental results serve as an important basis for future research in this field, which hold potential benefits to the academia and the industry.en_US
dc.language.isoen_USen_US
dc.subjectFuel cellsen_US
dc.subjectScraperen_US
dc.subjectElectrodeen_US
dc.subjectLithium batteryen_US
dc.subjectReliabilityen_US
dc.titleA novel scrape-applied method for the manufacture of the membrane-electrode assembly of the fuel-cell systemen_US
dc.typeArticleen_US
dc.identifier.doi10.1007/s10409-009-0261-7en_US
dc.identifier.journalACTA MECHANICA SINICAen_US
dc.citation.volume25en_US
dc.citation.issue6en_US
dc.citation.spage831en_US
dc.citation.epage837en_US
dc.contributor.department機械工程學系zh_TW
dc.contributor.departmentDepartment of Mechanical Engineeringen_US
dc.identifier.wosnumberWOS:000272016700011-
dc.citation.woscount0-
顯示於類別:期刊論文


文件中的檔案:

  1. 000272016700011.pdf

若為 zip 檔案,請下載檔案解壓縮後,用瀏覽器開啟資料夾中的 index.html 瀏覽全文。