雷射追蹤儀輔助量測架的分析與校正

完整後設資料紀錄

DC 欄位	值	語言
dc.contributor.author	程貴仁	en_US
dc.contributor.author	鄭璧瑩	en_US
dc.contributor.author	Pi-Ying Cheng	en_US
dc.date.accessioned	2014-12-12T02:21:23Z	-
dc.date.available	2014-12-12T02:21:23Z	-
dc.date.issued	1998	en_US
dc.identifier.uri	http://140.113.39.130/cdrfb3/record/nctu/#NT870489021	en_US
dc.identifier.uri	http://hdl.handle.net/11536/64696	-
dc.description.abstract	本篇論文主要是針對雷射追蹤儀接受光源的反射稜鏡的支撐架的量測校正做討論。首先介紹雷射追蹤儀的工作原理與實際操作時的一些限制，然後利用雷射追蹤儀並藉由反射稜鏡支撐架的輔助以非直接的方式來獲取三度空間中物體表面上的某點相對於雷射追蹤儀的座標位置。接下來將藉由一些實驗設計的方法來辨別數種演算法間的優劣，並利用最佳化的方法再增進量測的精度。然後再利用電腦模擬的方式來比較數種類型的誤差分佈，以獲得一些影響誤差大小的因素。最後利用實驗的結果來證明從模擬所得的一些推論。	zh_TW
dc.description.abstract	The main issue of this thesis is the calibration of the assistant measuring frame of laser tracker. We propose an algorithm by statistical and optimal method to improve the measuring accuracy. After computer simulation of the error distribution of several kinds of error model and the measuring experiment, we conclude some rules to improve the measuring accuracy.	en_US
dc.language.iso	zh_TW	en_US
dc.subject	反射稜鏡	zh_TW
dc.subject	雷射追蹤儀	zh_TW
dc.subject	輔助量測架	zh_TW
dc.subject	Corner cube	en_US
dc.subject	Laser tracker	en_US
dc.subject	assistant measuring frame	en_US
dc.title	雷射追蹤儀輔助量測架的分析與校正	zh_TW
dc.title	The Calibration of Laser Tracker's Assistant Measuring Frame	en_US
dc.type	Thesis	en_US
dc.contributor.department	機械工程學系	zh_TW
顯示於類別：	畢業論文