標題: Hot Embossing of Parallel v-Groove Microstructures on Glass
作者: Hsu, Ray-Quen
Wang, Hsing-Bun
Liang, Da-Lan
機械工程學系
Department of Mechanical Engineering
公開日期: 1-十一月-2009
摘要: A series of parallel v-groove microstructures was embossed on glass at an elevated temperature. The effects of glass temperature, applied pressure, holding time, and demold temperature on the conformity between the product and the tool were studied. We found that very precise microstructures can be fabricated on glass at temperatures about 35 degrees-55 degrees C above the glass transition temperatures. However, careful attention should be paid to the demold temperature and the mold release agent in order to prevent the tool from sticking to the glass.
URI: http://dx.doi.org/10.1111/j.1551-2916.2009.03257.x
http://hdl.handle.net/11536/6513
ISSN: 0002-7820
DOI: 10.1111/j.1551-2916.2009.03257.x
期刊: JOURNAL OF THE AMERICAN CERAMIC SOCIETY
Volume: 92
Issue: 11
起始頁: 2605
結束頁: 2608
顯示於類別:期刊論文


文件中的檔案:

  1. 000271188400018.pdf

若為 zip 檔案,請下載檔案解壓縮後,用瀏覽器開啟資料夾中的 index.html 瀏覽全文。