Full metadata record
DC FieldValueLanguage
dc.contributor.author鄭志逸en_US
dc.contributor.authorChih-Yi Chengen_US
dc.contributor.authoren_US
dc.contributor.authorDr. Tzeng-Feng Liuen_US
dc.date.accessioned2014-12-12T02:24:48Z-
dc.date.available2014-12-12T02:24:48Z-
dc.date.issued2000en_US
dc.identifier.urihttp://140.113.39.130/cdrfb3/record/nctu/#NT890159035en_US
dc.identifier.urihttp://hdl.handle.net/11536/66658-
dc.description.abstract中文摘要 在本論文中,我們利用穿透式電子顯微鏡(STEM)、X-ray能量散布分析儀(EDS) 研究Cu-19.5Mn-12.8Al 合金之相變化。發現在淬火的情況下,其顯微結構為(D03+L21+L-J)相的混合,從電子顯微鏡觀察的結果發現到L-J的相會在(D03+L21)基地中以兩個variants產生;其顯微結構為orthorhombic,其晶格常數為a=0.413nm, b=0.254nm 和c=0.728nm。 當合金在300℃溫度作時效處理後,此合金的顯微結構仍為(D03+L21+L-J)的相。然而,當時效溫度提高到350℃或450℃,則γ-brass 相會在a/2<100>的反向晶界上和基地內析出。當溫度提高到550℃作時效處理後,會發現到β-Mn在粗的γ-brass相旁邊開始析出。當時效處理溫度增加到650℃後,合金的顯微結構變為(B2+L-J+β-Mn)的混合相。最後,當時效溫度升高至750℃或以上時,合金之顯微結構與淬火狀態相同,亦為(D03+L21+L-J)相的混合。 從實驗的結果,我們可以歸納出此成份合金從300℃到750℃的一系列相變化過程:(D03+L21+L-J)→(D03+L21+L-J+γ-Cu9Al4)→(L21(D03)+L-J+γ-Cu9Al4)→(L21(D03)+L-J+γ-Cu9Al4+b-Mn)→(B2+L-J+b-Mn)→disordered b phase.zh_TW
dc.description.abstractAbstract Phase transformations in the Cu-19.5Mn-12.8Al alloy have been studied by using energy dispersive x-ray spectrometer (EDS) and scanning transmission electron microscopy (STEM) . In the as-quenched condition, the microstructure of the alloy was the mixture of (D03+L21+L-J) phases. Transmission electron microscopy examinations indicated that the L-J phase was formed within the matrix with two variants. The L-J phase has an orthorhombic structure with lattice parameters a=0.413nm, b=0.254nm and c=0.728nm. When the Cu-19.5Mn-12.8Al alloy was aged at 300℃ or below, the microstructure of the alloy was still (D03+L21+L-J) phases. However, when aging temperature was increased to 350℃ or 450℃, it was found that the γ-brass precipitates started to appear on the a/2<100>-type anti-phase boundaries and within the D03 domains. With increasing the aging temperature up to 550℃, the β-Mn particles were found to appear at the regions contiguous to the coarse γ-brass precipitates. When the aging temperature was increased to 650℃, the microstructure of the alloy was the mixture of (B2+L-J+β-Mn) phases. As the aging temperature was increased to 750℃ or above, only (D03+L21+L-J) phases could be found. Based on the above observations, the phase transformation sequence as the aging temperature increased from 200℃ to 750℃ was (D03+L21+L-J)→(D03+L21+L-J+γ-Cu9Al4)→(L21(D03)+L-J+γ-Cu9Al4)→(L21(D03)+L-J+γ-Cu9Al4+b-Mn)→(B2+L-J+b-Mn)→disordered b phase.en_US
dc.language.isoen_USen_US
dc.subject相變化zh_TW
dc.subjectCu-Mn-Alen_US
dc.title銅-19.5錳-12.8鋁合金相變化zh_TW
dc.titlePhase transformation in a Cu-19.5Mn-12.8Al alloyen_US
dc.typeThesisen_US
dc.contributor.department材料科學與工程學系zh_TW
Appears in Collections:Thesis