標題: | 具可調式零點的高選擇微波及毫米波帶通濾波器 Design of Microwave and Millimeter-wave Microstrip Filters with Tunable Transmission Zeros |
作者: | 陳昱志 Yu-Chih Chen 郭仁財 Jen-Tsai Kuo 電信工程研究所 |
關鍵字: | 微波;毫米波;交錯耦合;零點;平行耦合線共振腔濾波器;髮夾型共振腔濾波器;方形開迴路共振腔濾波器;zero;microwave;millimeter-wave;cross-coupled;parallel-coupled resonator filter;hairpin resonator filter;square open-loop resonator filter |
公開日期: | 2001 |
摘要: | 在平行耦合線共振腔濾波器、髮夾型及方形開迴路共振腔濾波器中,本文利用不同的饋入點,創造出兩個可調零點,以增加通帶邊緣的頻率選擇性。本文先以以理論證明,這兩個可調零點的產生與饋入點位置的關係,以及相關的電路設計;在另一方面,在2x2排列的準橢圓函數響應濾波器之設計,文中以給定的頻率響應函數計算出所需的耦合係數,再利用電磁模擬軟體,決定耦合共振腔之間的適當距離,以完成整個電路的佈局。在微波與毫米波頻段中,設計並製作平行耦合線共振腔濾波器、髮夾型、方形開迴路共振腔濾波器、2x2排列的交錯耦合型的微帶濾波器,並與實際量測結果比較。 Paralleled-coupled hairpin and square open-loop resonator are used to design bandpass filters in microwave and millimeter-wave bands. The 2x2 configuration can produce two transmission zeros on both sides of the passband. Two more zeros can be created and tuned via the control of input and output tapping. The coupling coefficients are determined by the filter specification. The full-wave simulator IE3D is used to design filters. Experimental results are compared with computed responses. |
URI: | http://140.113.39.130/cdrfb3/record/nctu/#NT900435098 http://hdl.handle.net/11536/68976 |
顯示於類別: | 畢業論文 |