Title: 適應性通道編碼調變模式變換最佳化之探討
Adaptive Coded Modulation- Level Switching Optimization
Authors: 賴遠青
Yuan-Quin Lei
張文鐘
Wen Thong Chang
電信工程研究所
Keywords: 適應性通道編碼調變;模式變換最佳化;Adaptive Coded Modulation;Level Switching Optimization
Issue Date: 2002
Abstract: 通訊系統的容量(capacity)是一個訊號強度與干擾強度的函數,因此,訊噪比(Signal to Noise Ratio)是影響通訊系統效能的最重要的問題,在有衰減變化的通道(fading channel)環境下,干擾的情形更是複雜,除了一般雜訊外,訊號強度的變化幅度更是影響通道容量的決定因素,因此,如何由訊噪比(SNR)擴及到載波干擾雜訊比(CINR, carrier to interference and noise ratio),來決定通道容量是一個重要的課題。為了能在不同的訊噪比的環境下尋找一個可以接受的通訊效能,我們使用了可變化的調變和錯誤改正碼(Adaptive modulation and adaptive forward error correcting code),以適應各種不同的通道環境。在無線通訊的系統中,通道是時時在變化的,我們用可變化的調變與編碼以應付這些不同的通道變化,而不同的調變與編碼技術會有不同的效能,我們的目標在尋找一最佳的決策方式,使的整體的效能最好,也就是調變後的系統,能夠達到最大的瞬間通道容量。而決策的考量,有最大的輸出(Maximize throughput)及最小化的錯誤率(Minimize Bit Error Rate & Block Error Rate)。
The capacity of the communication system is a function of signal to interference plus noise ratio. Thus the signal to noise ratio is most factor to influence the performance of communication systems. In fading channel, the communication problems become more complicated. We need adaptive transmission skill to replace traditional fix mode transmission. When the instantaneous SNR is high, more bit per symbol throughput mode is selected to increase the data rate. On the other hand, when the instantaneous SNR is low, less BPS throughput or robust mode is selected to decrease the bit error rate due to poor channel condition. In this thesis, we discuss the algorithms to find the optimum thresholds. These thresholds decide which mode is selected under certain instantaneous signal to noise ratio. When the modes have been determined, these optimum algorithms can find the optimum threshold to maximize the bit per symbol throughput and maintain target bit error rate.
URI: http://140.113.39.130/cdrfb3/record/nctu/#NT910435005
http://hdl.handle.net/11536/70536
Appears in Collections:Thesis