標題: Switching Loss Calculation (SLC) and Positive/Negative Slope Compensation Dynamic Droop Scaling (PNC-DDS) Technique for High-Efficiency Multiple-Input-Single-Output (MISO) Systems
作者: Tai, Tin-Jong
Chen, Ke-Horng
電控工程研究所
Institute of Electrical and Control Engineering
關鍵字: Dynamic droop;multiple input;positive/negative compensated (PNC);single output;switching loss calculation (SLC)
公開日期: 1-五月-2009
摘要: Power management is implemented in a multiple-input-single-output system in this paper. Actually, the design of the switching loss calculation circuit in a dynamic droop system (DDS) can decide the optimum driving solution according to the loading condition, i.e., more than one input source is disabled to reduce the switching loss at light loads. On the other hand, multiple-input sources are preferred to reduce the conduction loss at heavy loads. In other words, DDS with power management can achieve low drop output voltage and high efficiency over a wide load range. The positive/negative-compensated technique enhances the performance of the output voltage stability. Experimental results show that efficiency can be improved approximately 12% at light loads when two input sources are regulated at the switching frequency equal to 5 MHz. Simultaneously, good current sharing is also guaranteed.
URI: http://dx.doi.org/10.1109/TPEL.2009.2016099
http://hdl.handle.net/11536/7292
ISSN: 0885-8993
DOI: 10.1109/TPEL.2009.2016099
期刊: IEEE TRANSACTIONS ON POWER ELECTRONICS
Volume: 24
Issue: 5-6
起始頁: 1386
結束頁: 1398
顯示於類別:期刊論文


文件中的檔案:

  1. 000267036200024.pdf

若為 zip 檔案,請下載檔案解壓縮後,用瀏覽器開啟資料夾中的 index.html 瀏覽全文。