完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.author | Hsueh, Ching-Yi | en_US |
dc.contributor.author | Chu, Hsin-Sen | en_US |
dc.contributor.author | Yan, Wei-Mon | en_US |
dc.date.accessioned | 2014-12-08T15:09:59Z | - |
dc.date.available | 2014-12-08T15:09:59Z | - |
dc.date.issued | 2009-02-15 | en_US |
dc.identifier.issn | 0378-7753 | en_US |
dc.identifier.uri | http://dx.doi.org/10.1016/j.jpowsour.2008.11.011 | en_US |
dc.identifier.uri | http://hdl.handle.net/11536/7627 | - |
dc.description.abstract | The objective of this work is to investigate the transport phenomena and performance of a plate steam methanol micro-reformer. Micro channels of various height and width ratios are numerically analyzed to understand their effects on the reactant gas transport characteristics and micro-reformer performance. In addition, influences of Reynolds number and geometric size of micro channel on methanol conversion of micro-reformer and gas transport phenomena are also explored. The predicted results demonstrated that better performance is noted for a micro channel reformer with lower aspect-ratio micro channel. This is due to the larger the chemical reaction surface area for a lower aspect-ratio channel reformer. It is also found that the methanol conversion decreases with increasing Reynolds number Re. The results also indicate that the smaller micro channel size experiences a better methanol conversion. This is due to the fact that a smaller micro channel has a much more uniform temperature distribution, which in turn, fuel utilization efficiency is improved for a smaller micro channel reformer. (C) 2008 Elsevier B.V. All rights reserved. | en_US |
dc.language.iso | en_US | en_US |
dc.subject | Micro-reformer | en_US |
dc.subject | Micro channel | en_US |
dc.subject | Aspect ratio | en_US |
dc.subject | Chemical reaction | en_US |
dc.subject | Heat and mass transfer | en_US |
dc.title | Numerical study on micro-reformer performance and local transport phenomena of the plate methanol steam micro-reformer | en_US |
dc.type | Article | en_US |
dc.identifier.doi | 10.1016/j.jpowsour.2008.11.011 | en_US |
dc.identifier.journal | JOURNAL OF POWER SOURCES | en_US |
dc.citation.volume | 187 | en_US |
dc.citation.issue | 2 | en_US |
dc.citation.spage | 535 | en_US |
dc.citation.epage | 543 | en_US |
dc.contributor.department | 機械工程學系 | zh_TW |
dc.contributor.department | Department of Mechanical Engineering | en_US |
dc.identifier.wosnumber | WOS:000263694900034 | - |
dc.citation.woscount | 12 | - |
顯示於類別: | 期刊論文 |