標題: A High Efficiency Surface Modification Process for Multiwalled Carbon Nanotubes by Electron Cyclotron Resonance Plasma
作者: Tseng, Wen-Shou
Tseng, Chyuan-Yow
Chuang, Pi-Kai
Lo, An-Ya
Kuo, Cheng-Tzu
材料科學與工程學系
Department of Materials Science and Engineering
公開日期: 27-十一月-2008
摘要: A novel process of surface modification for multiwalled carbon nanotubes (MWCNTs) by using electron cyclotron resonance plasma is proposed. The process uses a H(2)/O(2) gas mixture as etching gas and applies a bias voltage of -250 DCV to the process stage to extract and accelerate hydrogen and oxygen cations. The generated high density and high incident energy cations are employed to create defects on the surface of nanotubes through ion bombardment. The oxygen cations with high reduction potential are simultaneously applied, oxidizing the surface of the nanotubes so as to form functional groups on the side walls most effectively. Additionally, being far from the plasma sheath, the MWCNTs can be maintained at a lower temperature to prevent from being decomposed under the high energy plasma. The efficiency of this method was systematically analyzed using X-ray photoelectron spectroscopy, scanning electron microscopy, transmission electron microscopy, Raman spectroscopy, and thermogravimetric analysis. The experimental results have shown that the proposed method is a highly effective way to functionalize MWCNTs, resulting in the nanotubes with high concentration of oxygen-containing functional groups and minimal structural damage within very short process time.
URI: http://dx.doi.org/10.1021/jp8028165
http://hdl.handle.net/11536/8131
ISSN: 1932-7447
DOI: 10.1021/jp8028165
期刊: JOURNAL OF PHYSICAL CHEMISTRY C
Volume: 112
Issue: 47
起始頁: 18431
結束頁: 18436
顯示於類別:期刊論文


文件中的檔案:

  1. 000261056500023.pdf

若為 zip 檔案,請下載檔案解壓縮後,用瀏覽器開啟資料夾中的 index.html 瀏覽全文。