Scanned probe oxidation on p-GaAs(100) surface with an atomic force microscopy
檔案
- 000258168800003.pdf (302.6 KB, Adobe PDF)
日期
2008-07-01
類型
系所
期刊名稱
NANOSCALE RESEARCH LETTERS
卷期與頁次
第 3 卷第 7 期,頁 249–254
ISSN
1931-7573
語言
英文
摘要
Locally anodic oxidation has been performed to fabricate the nanoscale oxide structures on p-GaAs(100) surface, by using an atomic force microscopy (AFM) with the conventional and carbon nanotube (CNT)-attached probes. The results can be utilized to fabricate the oxide nanodots under ambient conditions in noncontact mode. To investigate the conversion of GaAs to oxides, micro-Auger analysis was employed to analyze the chemical compositions. The growth kinetics and the associated mechanism of the oxide nanodots were studied under DC voltages. With the CNT-attached probe the initial growth rate of oxide nanodots is in the order of similar to 300 nm/s, which is similar to 15 times larger than that obtained by using the conventional one. The oxide nanodots cease to grow practically as the electric field strength is reduced to the threshold value of similar to 2 x 10(7) V cm(-1). In addition, results indicate that the height of oxide nanodots is significantly enhanced with an AC voltage for both types of probes. The influence of the AC voltages on controlling the dynamics of the AFM-induced nanooxidation is discussed.
關鍵詞
atomic force microscopyp-GaAs(100)nanooxidationmulti-walled carbon nanotubeAuger electron spectroscopy所屬典藏
期刊論文引用此條目
Jian, S.-R., & Juang, J.-Y. (2008). Scanned probe oxidation on p-GaAs(100) surface with an atomic force microscopy. NANOSCALE RESEARCH LETTERS, 3(7), 249–254. https://doi.org/10.1007/s11671-008-9144-2
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/8641