Full metadata record
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Chao, Liang | en_US |
dc.contributor.author | Han, Yu-Kai | en_US |
dc.contributor.author | Hiseh, Bi-Zen | en_US |
dc.contributor.author | Huang, Ying-Jie | en_US |
dc.contributor.author | Hsieh, Tar-Hwa | en_US |
dc.contributor.author | Lin, Ching-Mao | en_US |
dc.contributor.author | Lin, Shih-Zen | en_US |
dc.contributor.author | Tseng, Po-Hao | en_US |
dc.contributor.author | Ho, Ko-Shan | en_US |
dc.date.accessioned | 2014-12-08T15:11:22Z | - |
dc.date.available | 2014-12-08T15:11:22Z | - |
dc.date.issued | 2008-06-15 | en_US |
dc.identifier.issn | 0021-8995 | en_US |
dc.identifier.uri | http://dx.doi.org/10.1002/app.27990 | en_US |
dc.identifier.uri | http://hdl.handle.net/11536/8717 | - |
dc.description.abstract | A red-shift of the UV-vis spectra of n-dodecylbenzenesulfonic acid doped polyaniline (PANI (DBSA)(0.5)), resulting from the secondary doping of polyaniline backbones, was found in the presence of n-dodecylbenzenesulfonic acid zinc salt (Zn(DBS)(2)). It is proved to behave as steric hindrance spacers to induce the extension of the conjugation length through the straightening effect on the polyaniline backbones and the obtained mixtures (PANI(DBSA)(0.5) plus Zn(DBS)(2)) can be used as master batch materials (MB-13) for blending with regular polypropylene polymer (PP). The thermal degradation accompanied with loss of conductivity for MB-13 can be delayed to over 250 degrees C.when enough Zn(DBS)(2) was secondarily doped on PANI(DBSA)0.5., which allow the performance of its blending with other nonconducting/regular polymers possible. Below 80 rpm, increasing shear rates would induce higher viscosity difference between the MB-13 and PP matrix, resulting in elongation of MB-13 in the PP matrix and higher conductivities of the polyblends. The deviation from the Taylor equation, which is used to estimate the degree of elongation for a polyblend, started when shear rate is over 80 rpm. The leakage of Zn(DBS)(2) out of MB-13 can be confirmed by comparing the DSC thermograms and X-ray diffraction patterns with that of neat PP. Gradual deformation for the conductive fillers (MB-13) and a well-defined and expanded layered structure can be found when processing time is below 15 min with 60 rpm shear rate. The layers started to shrink back after 15 min of procession with the loss of the Zn(DBS)(2) from MB-13 in the PP matrix. (c) 2008 Wiley Periodicals, Inc. | en_US |
dc.language.iso | en_US | en_US |
dc.subject | polyaniline | en_US |
dc.subject | conducting polymer blend | en_US |
dc.subject | secondary doping effect | en_US |
dc.title | Conducting polymer blends prepared from polyaniline with n-dodecylbenzenesulfonic acid zinc salt as the secondary dopant | en_US |
dc.type | Article | en_US |
dc.identifier.doi | 10.1002/app.27990 | en_US |
dc.identifier.journal | JOURNAL OF APPLIED POLYMER SCIENCE | en_US |
dc.citation.volume | 108 | en_US |
dc.citation.issue | 6 | en_US |
dc.citation.spage | 3516 | en_US |
dc.citation.epage | 3522 | en_US |
dc.contributor.department | 材料科學與工程學系奈米科技碩博班 | zh_TW |
dc.contributor.department | Graduate Program of Nanotechnology , Department of Materials Science and Engineering | en_US |
dc.identifier.wosnumber | WOS:000255339200011 | - |
dc.citation.woscount | 6 | - |
Appears in Collections: | Articles |
Files in This Item:
If it is a zip file, please download the file and unzip it, then open index.html in a browser to view the full text content.