完整後設資料紀錄
DC 欄位語言
dc.contributor.author張隆國en_US
dc.contributor.authorCHANG LON-KOUen_US
dc.date.accessioned2014-12-13T10:28:39Z-
dc.date.available2014-12-13T10:28:39Z-
dc.date.issued2007en_US
dc.identifier.govdocNSC96-2221-E009-239-MY3zh_TW
dc.identifier.urihttp://hdl.handle.net/11536/88482-
dc.identifier.urihttps://www.grb.gov.tw/search/planDetail?id=1464789&docId=262581en_US
dc.description.abstract本計畫擬發展一種新的有別於傳統隔離型直/直流電源轉換器僅提供單向的電源傳輸,這一新結構融合雙向通訊功能於隔離介面的直/直流電源轉換器內,使得轉換器兼具電源轉換與雙向通訊功能,並提供安全的隔離機制。特別適合應用於:(1) 連接網路電話與PSTN(Public Switched Telephone Network)介面的DAA(Data Access Arrangement)晶片組,可解決目前產業界使用電容作為隔離介面可能發生的雷擊漏電問題;(2) 高壓量測電路電源供應與量測訊號通訊的整合,可縮小原先電源供應與雙向量測資訊個別處理的電路體積,值得一提的是此轉換器十分適合可攜式高壓量測儀器的應用;(3) 非接觸式電源傳輸(Contact-less Power Transformation)的充電及電源管理,利用轉換器雙向通訊功能,可達到變壓器初級控制(Primary Side Control),利於監控負載充電狀態與電源管理指令的下達。 計畫第一年,將評估適合雙向通訊的轉換器架構,並提出電磁感應式電源的雙向通訊方法與通訊協定,最後完成非穩壓型1MHz雙向通訊直/直流電源轉換器及其控制電路的研究與製作,此非穩壓型轉換器所提供之電源適用於無需穩壓之類比IC,例如DAA的次級端IC。第一年的主要目標是完成可靠的通信介面,使其既能傳電能給外接電器品,又能穩定的與其雙向通訊。 計畫第二年,將利用已完成的雙向通訊功能,安插一時段作為穩壓誤差訊號的回傳,使得轉換器的工作週期可隨負載穩壓調變,並分析此含穩壓迴授電路的系統特性,與設計頻率補償穩定電路,最後完成穩壓型1MHz雙向通訊直/直流電源轉換器及其控制電路的研究與製作。這一年將會尋求多樣的穩壓結構,使其也能完成雙向通訊的功能,如此才可擴大可接的外接電器對象。 計畫第三年,將針對提升雙向通訊頻率至10MHz的需求作電路修改,並將除了隔離電源變壓器之外的所有元件積體化,進行積體電路設計與模擬驗證,並製程晶片,最後完成穩壓型10MHz雙向通訊直/直流電源轉換器的製作與功能驗證。zh_TW
dc.description.abstractIn this project, we will develop a new topology for the isolated DC/DC converter with the bidirectional communication function. Unlike traditional switching power supply where the power transformer delivers only the output power to the load, the new topology of power converter combines both the directional data communication path and power delivery path into one path; that is the output power transfer. There are several applications that the new isolated DC/DC converter can provider: (1) Safer communication for DAA set: The chipset of DAA (Data Access Arrangement) which is the interface between VoIP (Voice over Internet Protocol) Phone and PSTN (Public Switched Telephone Network). By using a transformer to replace capacitors as the isolation barrier of DAA, the new design can provide a safer way when lightning surge occurs and avoid of leakage current passing through the capacitors. (2) Safe portable high-voltage power meter: Through using the isolated power supply with communication function, the danger measurement can be fulfilled by this design. (3) The power management for contact-less charger: Due the charger is contact-less, photo-coupler feedback can be saved. This design can proceed the primary-side control to monitor the left charge condition of battery and proceed power saving management. In the 1st year, a new topology for DC/DC converter with 1MHz bidirectional communication through power transformer and the associated control circuit will be accomplished. The power converter will have fixed duty ratio, so that the output voltage will be a pre-regulator, since the primary target of the first year job is to settle down the design of the converter with a reliable bidirectional communication function. In the 2nd year, the DC/DC converter built in 1st year will be refined to provide regulated output voltage by feeding back the output voltage through the communication having been built in the first year. Second, some regulated topologies, the analysis of the stability of the system, and the corresponding compensation circuits will be studied. Finally, we will accomplish the DC/DC converter with output voltage regulation and 1MHz bidirectional communication, and the associated control circuit. In the 3rd year, the DC/DC converter with output voltage regulation and 10MHz bidirectional communication, and its control IC (Integrated Circuit) will be accomplished. In this year, we will modify the control circuit first to so that the whole circuit can operate up to 10MHz. And then we will proceed simulation, layout, and tape out IC. Finally, all functions will be also verified on breadboard.en_US
dc.description.sponsorship行政院國家科學委員會zh_TW
dc.language.isozh_TWen_US
dc.subject電源轉換器zh_TW
dc.subject直/直流轉換器zh_TW
dc.subject隔離zh_TW
dc.subject雙向通訊zh_TW
dc.subject初級控制zh_TW
dc.subjectPower Converteren_US
dc.subjectDC/DC Converteren_US
dc.subjectBidirectional Communicationen_US
dc.subjectIsolationen_US
dc.subjectPrimary Side Control.en_US
dc.title一種新結構能提供雙向通訊與隔離介面的直/直流電源轉換器zh_TW
dc.titleA New Topology for the Isolated DC/DC Converter with Bidirectional Communication through Power Transformeren_US
dc.typePlanen_US
dc.contributor.department國立交通大學電機與控制工程學系(所)zh_TW
顯示於類別:研究計畫