Full metadata record
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Huang, Zhe-Yang | en_US |
dc.contributor.author | Huang, Che-Cheng | en_US |
dc.date.accessioned | 2014-12-08T15:11:39Z | - |
dc.date.available | 2014-12-08T15:11:39Z | - |
dc.date.issued | 2007 | en_US |
dc.identifier.isbn | 978-1-4244-1131-3 | en_US |
dc.identifier.uri | http://hdl.handle.net/11536/8946 | - |
dc.description.abstract | In this paper a CMOS dual-wideband low-noise amplifier (LNA) is designed for ultra-wideband (UWB) wireless receiver radio system..The design consists of a wideband input impedance matching network, two stage cascode amplifiers with shunt-peaked load, a notch filter and an output buffer for measurement purpose. It is simulated in TSMC 0.18um standard RF CMOS process. The LNA gives 13.66dB maximum power gain between 3.0GHz-4.9GHz and 10.34dB maximum power gain between 6.0GHz-10.3GHz while consuming 24.07mW through a 1.8V supply. Over the 3.1GHz-4.9GHz frequency band and the 6.0GHz-10.3GHz, a minimum noise figure is 2.6dB and 3.8dB. Input return loss lower than -8.31dB in all bandwidth have been achieved. | en_US |
dc.language.iso | en_US | en_US |
dc.subject | RFIC | en_US |
dc.subject | ultra-wideband | en_US |
dc.subject | UWB | en_US |
dc.subject | notch | en_US |
dc.subject | filter | en_US |
dc.subject | LNA and low-noise amplifier | en_US |
dc.title | CMOS dual-wideband low-noise amplifier with notch filter for 3.1GHz-10.6GHz ultra-wideband wireless receiver | en_US |
dc.type | Proceedings Paper | en_US |
dc.identifier.journal | ASICON 2007: 2007 7TH INTERNATIONAL CONFERENCE ON ASIC, VOLS 1 AND 2, PROCEEDINGS | en_US |
dc.citation.spage | 415 | en_US |
dc.citation.epage | 418 | en_US |
dc.contributor.department | 電信工程研究所 | zh_TW |
dc.contributor.department | Institute of Communications Engineering | en_US |
dc.identifier.wosnumber | WOS:000253449900100 | - |
Appears in Collections: | Conferences Paper |