33-channel 64-QAM signal transmission using a 1.3-mu m semiconductor optical amplifier
| dc.citation.epage | 121 | en_US |
| dc.citation.issue | 1 | en_US |
| dc.citation.spage | 119 | en_US |
| dc.citation.volume | 8 | en_US |
| dc.citation.woscount | 5 | |
| dc.contributor.author | Chiang, PY | en_US |
| dc.contributor.author | Tai, C | en_US |
| dc.contributor.author | Way, WI | en_US |
| dc.contributor.department | 電信工程研究所 | zh_TW |
| dc.contributor.department | 電信研究中心 | zh_TW |
| dc.contributor.department | Institute of Communications Engineering | en_US |
| dc.contributor.department | Center for Telecommunications Research | en_US |
| dc.date.accessioned | 2014-12-08T15:02:57Z | |
| dc.date.available | 2014-12-08T15:02:57Z | |
| dc.date.issued | 1996-01-01 | en_US |
| dc.description.abstract | From the network evolution point of view, optical amplifiers in a hybrid fiber coaxial (HFC) system may become extensively deployed at approximately the same time as when analog AM-VSB video signals are all replaced by digital M-QAM or M-VSB signals. This letter demonstrates the feasibility of using a 1.3-mu m semiconductor optical amplifier to transport 33 channels of 64-QAM signals with 30 Mbps/channel. A total system power budget of 20.3 dB was obtained. | en_US |
| dc.identifier.doi | 10.1109/68.475798 | en_US |
| dc.identifier.issn | 1041-1135 | en_US |
| dc.identifier.journal | IEEE PHOTONICS TECHNOLOGY LETTERS | en_US |
| dc.identifier.uri | http://dx.doi.org/10.1109/68.475798 | en_US |
| dc.identifier.uri | https://ir.lib.nycu.edu.tw/handle/11536/1562 | |
| dc.identifier.wosnumber | WOS:A1996TN50000041 | |
| dc.language.iso | en_US | en_US |
| dc.title | 33-channel 64-QAM signal transmission using a 1.3-mu m semiconductor optical amplifier | en_US |
| dc.type | Article | en_US |