The Glass-Molding Process for Planar-Integrated Micro-Optical Component
| dc.citation.epage | 98 | en_US |
| dc.citation.issue | 1 | en_US |
| dc.citation.spage | 96 | en_US |
| dc.citation.volume | 18 | en_US |
| dc.citation.woscount | 2 | |
| dc.contributor.author | Huang, Chien-Yao | en_US |
| dc.contributor.author | Sze, Jyh-Rou | en_US |
| dc.contributor.author | Huang, Kuo-Cheng | en_US |
| dc.contributor.author | Kuo, Chao-Hui | en_US |
| dc.contributor.author | Tseng, Shih-Feng | en_US |
| dc.contributor.author | Chou, Chang-Pin | en_US |
| dc.contributor.department | 機械工程學系 | zh_TW |
| dc.contributor.department | Department of Mechanical Engineering | en_US |
| dc.date.accessioned | 2014-12-08T15:37:59Z | |
| dc.date.available | 2014-12-08T15:37:59Z | |
| dc.date.issued | 2011-01-01 | en_US |
| dc.description.abstract | This paper presents a precision glass-molding process to fabricate planar-integrated micro-optical components (PIMOC) applied to a micro projection display system, optical interconnection system and optical storage system. The PIMOC was designed based on wave propagation theory, and fabricated using a glass molding process. Experimental results are discussed in this article. The experiment showed that the PIMOC fabricated in a vacuum environment meets the design value with precision glass-molding technology (PGMT) at a molding force of 2.75 kN, a molding temperature of 750 degrees C and a cooling rate of 49 degrees C/min. (C) 2011 The Japan Society of Applied Physics | en_US |
| dc.identifier.doi | 10.1007/s10043-011-0039-6 | en_US |
| dc.identifier.issn | 1340-6000 | en_US |
| dc.identifier.journal | OPTICAL REVIEW | en_US |
| dc.identifier.uri | http://dx.doi.org/10.1007/s10043-011-0039-6 | en_US |
| dc.identifier.uri | https://ir.lib.nycu.edu.tw/handle/11536/26082 | |
| dc.identifier.wosnumber | WOS:000287248800019 | |
| dc.language.iso | en_US | en_US |
| dc.subject | precision glass-molding technology (PGMT) | en_US |
| dc.subject | planar-integrated micro-optical component (PIMOC) | en_US |
| dc.title | The Glass-Molding Process for Planar-Integrated Micro-Optical Component | en_US |
| dc.type | Article | en_US |