Microstrip-fed broadband circularly polarised monopole antenna
| dc.citation.epage | 525 | en_US |
| dc.citation.issue | 4 | en_US |
| dc.citation.spage | 518 | en_US |
| dc.citation.volume | 4 | en_US |
| dc.citation.woscount | 13 | |
| dc.contributor.author | Wu, J. -W. | en_US |
| dc.contributor.author | Ke, J. -Y. | en_US |
| dc.contributor.author | Jou, C. F. | en_US |
| dc.contributor.author | Wang, C. -J. | en_US |
| dc.contributor.department | 電信工程研究所 | zh_TW |
| dc.contributor.department | Institute of Communications Engineering | en_US |
| dc.date.accessioned | 2014-12-08T15:07:05Z | |
| dc.date.available | 2014-12-08T15:07:05Z | |
| dc.date.issued | 2010-04-01 | en_US |
| dc.description.abstract | A microstrip-fed broadband circularly polarised (CP) monopole antenna was studied. A broad impedance bandwidth and wide axial ratio bandwidth (AR-BW) could be achieved simultaneously. This antenna used a conventional monopole architecture, except for its deforming ground plane and asymmetric-feed approach. The asymmetric-feed was used to provide an orthogonal component distinct from its original linear polarisation. In addition, by embedding a slit and a stub on the ground plane, this antenna could generate CP wave radiation and achieve a broad impedance bandwidth. According to the measurement results, the impedance bandwidth was 6.56 GHz for a 10 dB return loss, which covered a range of 2.32-8.88 GHz. The AR-BW was 1.2 GHz for a 3 dB AR, which covered a range of 3.2-4.4 GHz. | en_US |
| dc.identifier.doi | 10.1049/iet-map.2008.0400 | en_US |
| dc.identifier.issn | 1751-8725 | en_US |
| dc.identifier.journal | IET MICROWAVES ANTENNAS & PROPAGATION | en_US |
| dc.identifier.uri | http://dx.doi.org/10.1049/iet-map.2008.0400 | en_US |
| dc.identifier.uri | https://ir.lib.nycu.edu.tw/handle/11536/5559 | |
| dc.identifier.wosnumber | WOS:000279253500012 | |
| dc.language.iso | en_US | en_US |
| dc.title | Microstrip-fed broadband circularly polarised monopole antenna | en_US |
| dc.type | Article | en_US |