A dual CP slot antenna using a modified Wilkinson power divider configuration
| dc.citation.epage | 207 | en_US |
| dc.citation.issue | 5 | en_US |
| dc.citation.spage | 205 | en_US |
| dc.citation.volume | 8 | en_US |
| dc.citation.woscount | 6 | |
| dc.contributor.author | Tseng, WJ | en_US |
| dc.contributor.author | Chung, SJ | en_US |
| dc.contributor.department | 電信工程研究所 | zh_TW |
| dc.contributor.department | Institute of Communications Engineering | en_US |
| dc.date.accessioned | 2014-12-08T15:49:08Z | |
| dc.date.available | 2014-12-08T15:49:08Z | |
| dc.date.issued | 1998-05-01 | en_US |
| dc.description.abstract | A dual circularly polarized (CP) slot antenna based on a proposed equal-split Wilkinson power divider is presented, An offset-fed slot antenna, which was analyzed using the method of moments together with a mixed potential integral equation, was used to replace the lumped resistor in the divider. A dual CP slot antenna operating at S-band was designed and demonstrated experimentally. The antenna possessed a return loss bandwidth of 39.3%, an isolation bandwidth of 10% for VSWR <2, and 3-dB axial ratio bandwidth of 28%. | en_US |
| dc.identifier.doi | 10.1109/75.668732 | en_US |
| dc.identifier.issn | 1051-8207 | en_US |
| dc.identifier.journal | IEEE MICROWAVE AND GUIDED WAVE LETTERS | en_US |
| dc.identifier.uri | http://dx.doi.org/10.1109/75.668732 | en_US |
| dc.identifier.uri | https://ir.lib.nycu.edu.tw/handle/11536/32658 | |
| dc.identifier.wosnumber | WOS:000073237900010 | |
| dc.language.iso | en_US | en_US |
| dc.subject | dual CP slot antenna | en_US |
| dc.subject | moment method | en_US |
| dc.subject | Wilkinson power divider | en_US |
| dc.title | A dual CP slot antenna using a modified Wilkinson power divider configuration | en_US |
| dc.type | Article | en_US |