<link rel="stylesheet" href="styles.cf390c6bfbe7555f.css"> Skip to main content

Saturated flow boiling heat transfer and associated bubble characteristics of FC-72 on a heated micro-pin-finned silicon chip

dc.citation.epage3876en_US
dc.citation.issue19-20en_US
dc.citation.spage3862en_US
dc.citation.volume50en_US
dc.citation.woscount22
dc.contributor.authorLie, Y. M.en_US
dc.contributor.authorKe, J. H.en_US
dc.contributor.authorChang, W. R.en_US
dc.contributor.authorCheng, T. C.en_US
dc.contributor.authorLin, T. F.en_US
dc.contributor.department機械工程學系zh_TW
dc.contributor.departmentDepartment of Mechanical Engineeringen_US
dc.date.accessioned2014-12-08T15:13:24Z
dc.date.available2014-12-08T15:13:24Z
dc.date.issued2007-09-01en_US
dc.description.abstractAn experiment is carried out here to investigate flow boiling heat transfer and associated bubble characteristics of FC-72 on a heated micro-pin-finned silicon chip flush-mounted in the bottom of a horizontal rectangular channel. Besides, three different micro-structures of the chip surface are examined, namely, the smooth, pin-finned 200 and pin-finned 100 surfaces. The pin-finned 200 and 100 surfaces, respectively, contain micro-pin-fins of size 200 mu m x 200 mu m x 70 mu m (width x length x height) and 100 mu m x 100 mu m x 70 mu m. The pitch of the fins is equal to the fin width for both surfaces. The effects of the FC-72 mass flux, imposed heat flux, and surface microstructures of the silicon chip on the FC-72 saturated flow boiling characteristics are examined in detail. The experimental data show that an increase in the FC-72 mass flux causes a delay in the boiling incipience. However, the flow boiling heat transfer coefficient is not affected by the coolant mass flux. But adding the micro-pin-fin structures to the chip surfaces can effectively enhance the single-phase convection and flow boiling heat transfer. Moreover, the mean bubble departure diameter and active nucleation site density are reduced for a rise in the FC-72 mass flux. A higher coolant mass flux results in a higher mean bubble departure frequency. Furthermore, larger bubble departure diameter, higher bubble departure frequency, and higher active nucleation site density are observed at a higher imposed heat flux. We also note that adding the micro-pin-fins to the chips decrease the bubble departure diameter and increase the bubble departure frequency. However, the departing bubbles are larger for the pin-finned 100 surface than the pin-finned 200 surface but the bubble departure frequency exhibits an opposite trend. Finally, empirical equations to correlate the present data for the FC-72 single-phase liquid convection and saturated flow boiling heat transfer coefficients and for the bubble characteristics are provided. (c) 2007 Elsevier Ltd. All rights reserved.en_US
dc.identifier.doi10.1016/j.ijheatmasstransfer.2007.02.010en_US
dc.identifier.issn0017-9310en_US
dc.identifier.journalINTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFERen_US
dc.identifier.urihttp://dx.doi.org/10.1016/j.ijheatmasstransfer.2007.02.010en_US
dc.identifier.urihttps://ir.lib.nycu.edu.tw/handle/11536/10363
dc.identifier.wosnumberWOS:000247750800016
dc.language.isoen_USen_US
dc.titleSaturated flow boiling heat transfer and associated bubble characteristics of FC-72 on a heated micro-pin-finned silicon chipen_US
dc.typeArticleen_US

Files

Original bundle

Now showing 1 - 1 of 1
Loading...
Thumbnail Image
Name:
000247750800016.pdf
Size:
1 MB
Format:
Adobe Portable Document Format

License bundle

Now showing 1 - 1 of 1
Loading...
Thumbnail Image
Name:
license.txt
Size:
1.71 KB
Format:
Item-specific license agreed to upon submission
Description: