Resistor-Less Design of Power-Rail ESD Clamp Circuit in Nanoscale CMOS Technology

Abstract

A resistor-less power-rail electrostatic discharge (ESD) clamp circuit realized with only thin-gate-oxide devices and with a silicon-controlled rectifier (SCR) as the main ESD clamp device has been proposed and verified in a 65-nm CMOS process. By skillfully utilizing the gate leakage current to realize the equivalent resistor in the ESD-transient detection circuit, the RC-based ESD detection mechanism can be achieved without using an actual resistor to significantly reduce the layout area in I/O cells. From the measured results, the new proposed power-rail ESD clamp circuit with an SCR width of 45 mu m can achieve 5-kV human-body-model and 400-V machine-model ESD levels under the ESD stress event while consuming only a standby leakage current of 1.43 nA at room temperature under the normal circuit operating condition with 1-V bias.