Fabrication of fresnel lens by glass molding technique
| dc.citation.epage | 204 | en_US |
| dc.citation.issue | 2 | en_US |
| dc.citation.spage | 202 | en_US |
| dc.citation.volume | 20 | en_US |
| dc.citation.woscount | 1 | |
| dc.contributor.author | Huang, Chien-Yao | en_US |
| dc.contributor.author | Chen, Chun-Chieh | en_US |
| dc.contributor.author | Chou, Hsiao-Yu | en_US |
| dc.contributor.author | Chou, Chang-Pin | en_US |
| dc.contributor.department | 機械工程學系 | zh_TW |
| dc.contributor.department | Department of Mechanical Engineering | en_US |
| dc.date.accessioned | 2014-12-08T15:30:25Z | |
| dc.date.available | 2014-12-08T15:30:25Z | |
| dc.date.issued | 2013-03-01 | en_US |
| dc.description.abstract | In this paper, we describe the fabrication of a Fresnel lens with a diameter of 15mm by a glass molding technique. Tungsten carbide and K-CSK120 were used as the materials of the mold and lens, respectively. The optimal parameters determined for the molding process included a molding temperature of 560 A degrees C, a molding force of 300 N, a temperature holding time of 180 s, and a cooling rate of 18.5 A degrees C/min. | en_US |
| dc.identifier.doi | 10.1007/s10043-013-0035-0 | en_US |
| dc.identifier.issn | 1340-6000 | en_US |
| dc.identifier.journal | OPTICAL REVIEW | en_US |
| dc.identifier.uri | http://dx.doi.org/10.1007/s10043-013-0035-0 | en_US |
| dc.identifier.uri | https://ir.lib.nycu.edu.tw/handle/11536/21752 | |
| dc.identifier.wosnumber | WOS:000316821000023 | |
| dc.language.iso | en_US | en_US |
| dc.subject | Fresnel lens | en_US |
| dc.subject | glass molding | en_US |
| dc.subject | diamond grinding | en_US |
| dc.subject | K-CSK120 | en_US |
| dc.title | Fabrication of fresnel lens by glass molding technique | en_US |
| dc.type | Article | en_US |