Substrate-triggered SCR device for on-chip ESD protection in fully silicided sub-0.25-mu m CMOS process

Abstract

The turn-on mechanism of a silicon-controlled rectifier (SCR) device is essentially a current triggering event. While a current is applied to the, base or - substrate of the SCR device, it can be quickly triggered, into its latching state. In this paper, a novel design concept to turn on the SCR device by applying the substrate-triggered technique is first proposed for effective on-chip electrostatic discharge (ESD) protection. This novel substrate-triggered SCR device has the advantages of controllable switching voltage and adjustable holding voltage and is compatible with, general CMOS processes without extra process modification such as the silicide-blocking mask and ESD implantation. Moreover, the substrate-triggered SCR, devices can be stacked in ESD protection circuits to avoid the translient-induced latch-up issue. The turn-on time of the proposed substrate-triggered SCR devices, can be reduced from 27.4 to 7.8 ns by the substrate-triggering, technique. The substrate-triggered SCR device with a small active area of only 20 mum x 20 mum can sustain the HBM ESD stress of 6.5 kV in a fully silicided 0.25-mum CMOS process.