Design and fabrication of a dense wavelength division demultiplexer with grism structure
| dc.citation.epage | en_US | |
| dc.citation.issue | 2 | en_US |
| dc.citation.volume | 44 | en_US |
| dc.citation.woscount | 2 | |
| dc.contributor.author | Sze, JR | en_US |
| dc.contributor.author | Lu, MH | en_US |
| dc.contributor.department | 光電工程學系 | zh_TW |
| dc.contributor.department | Department of Photonics | en_US |
| dc.date.accessioned | 2014-12-08T15:35:24Z | |
| dc.date.available | 2014-12-08T15:35:24Z | |
| dc.date.issued | 2005-02-01 | en_US |
| dc.description.abstract | The implementation of a low-loss demultiplexer with a KRS-5 grism structure for a dense wavelength division demultiplexing (DWDDM) system in fiber communication is carried out. The system has 16 channels with wavelength spacing of 0.8 nm in the C-band wavelength region. This device is successfully fabricated by a precise plunge-cut diamond-turning technology. Numerical calculations and measurements indicate that this DWDDM is polarization independent and has higher optical efficiency and signal to noise ratio (SNR). (c) 2005 Society of Photo-Optical Instrumentation Engineers. | en_US |
| dc.identifier.doi | 10.1117/1.1849195 | en_US |
| dc.identifier.issn | 0091-3286 | en_US |
| dc.identifier.journal | OPTICAL ENGINEERING | en_US |
| dc.identifier.uri | http://dx.doi.org/10.1117/1.1849195 | en_US |
| dc.identifier.uri | https://ir.lib.nycu.edu.tw/handle/11536/23964 | |
| dc.identifier.wosnumber | WOS:000227821100029 | |
| dc.language.iso | en_US | en_US |
| dc.subject | grism | en_US |
| dc.subject | dense wavelength division demultiplexer | en_US |
| dc.subject | plunge-cut diamond-turning technology | en_US |
| dc.title | Design and fabrication of a dense wavelength division demultiplexer with grism structure | en_US |
| dc.type | Article | en_US |