<link rel="stylesheet" href="styles.cf390c6bfbe7555f.css"> Skip to main content

Application of nanosilver surface modification to RO membrane and spacer for mitigating biofouling in seawater desalination

dc.citation.epage3786en_US
dc.citation.issue15en_US
dc.citation.spage3777en_US
dc.citation.volume43en_US
dc.citation.woscount66
dc.contributor.authorYang, Hui-Lingen_US
dc.contributor.authorLin, Justin Chun-Teen_US
dc.contributor.authorHuang, Chihpinen_US
dc.contributor.department環境工程研究所zh_TW
dc.contributor.departmentInstitute of Environmental Engineeringen_US
dc.date.accessioned2014-12-08T15:09:01Z
dc.date.available2014-12-08T15:09:01Z
dc.date.issued2009-08-01en_US
dc.description.abstractBiofouling is one the most critical problems in seawater desalination plants and science has not yet found effective ways to control it. Silver compounds and ions are historically recognized for their effective antimicrobial activity. Nanosilver particles have been applied as a biocide in many aspects of disinfection, including healthcare products and water treatment. This study proposes an innovative biofouling control approach by surface modification of the RO membrane and spacer with nanosilver coating. A chemical reduction method was used for directly coating nanosilver particles on the membrane sheet and spacer. The surface-modified membrane and spacer were tested for their antifouling performance in a cross-flow flat-sheet membrane cell, which is a part of a pilot plant in Wukan desalination plant. The silver-coating membranes and spacers, along with an unmodified membrane sheet, were tested in the membrane cell and compared on the basis of their antifouling performance. Permeate flux decline and salt rejection was continuously monitored through the testing period. Meanwhile regrowth of microbial populations on the membrane cell was quantified by a unique microbial counting every three to four days. The results showed that both silver-coated membrane (Ag-cM) with uncoated spacer and silver-coated spacer (Ag-cS) with uncoated membrane perforemed better than the unmodified membrane and spacer (Un-MS), in terms of much slower decrease in permeate flux and TDS rejection. However, the effect of silver-coated spacer on antimicrobial activity was more lasting. In the silver-coated spacer test, there was almost no multiplication of cells detected on the membrane during the whole testing period. Besides, the cells adhering to the membrane seemed to lose their activity quickly. According to the RO performance and microbial growth morphology, the nanosilver coating technology is valuable for use in biofouling control in seawater desalination. (C) 2009 Elsevier Ltd. All rights reserved.en_US
dc.identifier.doi10.1016/j.watres.2009.06.002en_US
dc.identifier.issn0043-1354en_US
dc.identifier.journalWATER RESEARCHen_US
dc.identifier.urihttp://dx.doi.org/10.1016/j.watres.2009.06.002en_US
dc.identifier.urihttps://ir.lib.nycu.edu.tw/handle/11536/6860
dc.identifier.wosnumberWOS:000269049300015
dc.language.isoen_USen_US
dc.subjectBiofoulingen_US
dc.subjectNanosilver particlesen_US
dc.subjectReverse osmosisen_US
dc.subjectSpaceren_US
dc.subjectSurface modificationen_US
dc.titleApplication of nanosilver surface modification to RO membrane and spacer for mitigating biofouling in seawater desalinationen_US
dc.typeArticleen_US

Files

Original bundle

Now showing 1 - 1 of 1
Loading...
Thumbnail Image
Name:
000269049300015.pdf
Size:
1,017.18 KB
Format:
Adobe Portable Document Format

License bundle

Now showing 1 - 1 of 1
Loading...
Thumbnail Image
Name:
license.txt
Size:
1.71 KB
Format:
Item-specific license agreed to upon submission
Description: