Formation of omega and Ti2Ni phases in a residual Ti-Ni-Ti multilayer between stainless steel and zirconia after bonding at 1173K
| dc.citation.epage | 619 | en_US |
| dc.citation.issue | 10 | en_US |
| dc.citation.spage | 609 | en_US |
| dc.citation.volume | 94 | en_US |
| dc.citation.woscount | 0 | en_US |
| dc.contributor.author | Wei, Shen-Hung | en_US |
| dc.contributor.author | Lin, Chien-Cheng | en_US |
| dc.contributor.department | 材料科學與工程學系 | zh_TW |
| dc.contributor.department | Department of Materials Science and Engineering | en_US |
| dc.date.accessioned | 2015-07-21T11:20:28Z | |
| dc.date.available | 2015-07-21T11:20:28Z | |
| dc.date.issued | 2014-10-03 | en_US |
| dc.description.abstract | Stainless steel (316L) and 8mol pct Y2O3-stabilized zirconia (8Y-ZrO2) were bonded using a Ti-Ni-Ti multilayer at 1173K (900 degrees C) for 1h. Cross-sectional transmission electron microscopy specimens were prepared by an innovative focused ion beam plus lift-out technique. In addition to acicular alpha-Ti, the dissolution of Fe, Cr, and Ni diffusing outwards from 316L into beta-Ti led to the precipitation of the omega (omega) phase with different variants in the residual Ti foil between 316L and Ni. The omega-phase was not found in the residual Ti foil between Ni and 8Y-ZrO2, while Ti2Ni precipitates were precipitated in some alpha-Ti grains owing to the exclusion of Ni from the beta-Ti. | en_US |
| dc.identifier.doi | 10.1080/09500839.2014.951705 | en_US |
| dc.identifier.issn | 0950-0839 | en_US |
| dc.identifier.journal | PHILOSOPHICAL MAGAZINE LETTERS | en_US |
| dc.identifier.uri | http://dx.doi.org/10.1080/09500839.2014.951705 | en_US |
| dc.identifier.uri | https://ir.lib.nycu.edu.tw/handle/11536/124286 | |
| dc.identifier.wosnumber | WOS:000348938400001 | en_US |
| dc.language.iso | en_US | en_US |
| dc.subject | transmission electron microscopy | en_US |
| dc.subject | omega phase | en_US |
| dc.subject | titanium | en_US |
| dc.subject | bonding | en_US |
| dc.subject | stainless steels | en_US |
| dc.subject | interfaces | en_US |
| dc.title | Formation of omega and Ti2Ni phases in a residual Ti-Ni-Ti multilayer between stainless steel and zirconia after bonding at 1173K | en_US |
| dc.type | Article | en_US |