Grain boundary precipitation in Fe-30Mn-9Al-5Cr-0.7C alloy
| dc.citation.epage | 1593 | en_US |
| dc.citation.issue | 7 | en_US |
| dc.citation.spage | 1589 | en_US |
| dc.citation.volume | 49 | en_US |
| dc.citation.woscount | 3 | |
| dc.contributor.author | Tuan, Yi Hsuan | en_US |
| dc.contributor.author | Lin, Chih Lung | en_US |
| dc.contributor.author | Chao, Chuen Guang | en_US |
| dc.contributor.author | Liu, Tzeng Feng | en_US |
| dc.contributor.department | 材料科學與工程學系 | zh_TW |
| dc.contributor.department | Department of Materials Science and Engineering | en_US |
| dc.date.accessioned | 2014-12-08T15:11:13Z | |
| dc.date.available | 2014-12-08T15:11:13Z | |
| dc.date.issued | 2008-07-01 | en_US |
| dc.description.abstract | The as-quenched microstructure of the Fe-30%Mn-9%Al-5%Cr-0.7%C (in mass%) alloy was single-phase austenite. When the as-quenched alloy was aged at 550 degrees C-750 degrees C, fine (Fe,Mn)(3)AlC carbides were formed within the austenite matrix. In addition, as the aging temperature increased, a M7C3 carbide + D0(3) -> M7C3 carbide + B-2 -> M7C3 carbide + alpha (ferrite) phase transition had occurred on the grain boundaries. This grain boundary precipitation behavior has never before been observed in FeMnAlC and FeMnAlCrC alloy systems. | en_US |
| dc.identifier.doi | 10.2320/matertrans.MRA2008060 | en_US |
| dc.identifier.issn | 1345-9678 | en_US |
| dc.identifier.journal | MATERIALS TRANSACTIONS | en_US |
| dc.identifier.uri | http://dx.doi.org/10.2320/matertrans.MRA2008060 | en_US |
| dc.identifier.uri | https://ir.lib.nycu.edu.tw/handle/11536/8614 | |
| dc.identifier.wosnumber | WOS:000258810900016 | |
| dc.language.iso | en_US | en_US |
| dc.subject | transmission electron microscopy | en_US |
| dc.subject | carbides | en_US |
| dc.subject | ordering | en_US |
| dc.subject | austenitic iron aluminum manganese chromium carbon alloy | en_US |
| dc.title | Grain boundary precipitation in Fe-30Mn-9Al-5Cr-0.7C alloy | en_US |
| dc.type | Article | en_US |