A novel technique for manufacturing metal-bonded Nd-Fe-B magnets by squeeze casting
| dc.citation.epage | 646 | en_US |
| dc.citation.issue | 3 | en_US |
| dc.citation.spage | 637 | en_US |
| dc.citation.volume | 33 | en_US |
| dc.citation.woscount | 1 | |
| dc.contributor.author | Ji, JF | en_US |
| dc.contributor.author | Chao, CG | en_US |
| dc.contributor.department | 材料科學與工程學系 | zh_TW |
| dc.contributor.department | Department of Materials Science and Engineering | en_US |
| dc.date.accessioned | 2014-12-08T15:42:40Z | |
| dc.date.available | 2014-12-08T15:42:40Z | |
| dc.date.issued | 2002-03-01 | en_US |
| dc.description.abstract | A new method was developed for forming Nd-Fe-B rapidly quenched ribbon to metal-bonded magnets. The process was carried out by a squeeze casting technique. The A356 aluminum alloy and zinc alloy (ZAS) were used as metal binders. The energy product (BH) of A356-bonded magnet was 62.2 k J/m(3) and that of ZAS-bonded magnet was 61.2 k J/m(3). The maximum bending strength of ZAS-bonded magnets (259 MPa) was greater than that of A356-bonded magnets (148 MPa). The corrosion behavior of both magnets was studied in the salt spray test and the magnetization flux loss was measured. The magnetization flux loss of ZAS-bonded magnets is less than that of A356-bonded magnets due to Zn as a sacrificial anode to protect MQ powders. | en_US |
| dc.identifier.doi | 10.1007/s11661-002-0125-2 | en_US |
| dc.identifier.issn | 1073-5623 | en_US |
| dc.identifier.journal | METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE | en_US |
| dc.identifier.uri | http://dx.doi.org/10.1007/s11661-002-0125-2 | en_US |
| dc.identifier.uri | https://ir.lib.nycu.edu.tw/handle/11536/28964 | |
| dc.identifier.wosnumber | WOS:000176328600018 | |
| dc.language.iso | en_US | en_US |
| dc.title | A novel technique for manufacturing metal-bonded Nd-Fe-B magnets by squeeze casting | en_US |
| dc.type | Article | en_US |