Stimulus driver for epilepsy seizure suppression with adaptive loading impedance
| dc.citation.epage | en_US | |
| dc.citation.issue | 6 | en_US |
| dc.citation.volume | 8 | en_US |
| dc.citation.woscount | 0 | |
| dc.contributor.author | Ker, Ming-Dou | en_US |
| dc.contributor.author | Lin, Chun-Yu | en_US |
| dc.contributor.author | Chen, Wei-Ling | en_US |
| dc.contributor.department | 電機學院 | zh_TW |
| dc.contributor.department | College of Electrical and Computer Engineering | en_US |
| dc.date.accessioned | 2014-12-08T15:20:59Z | |
| dc.date.available | 2014-12-08T15:20:59Z | |
| dc.date.issued | 2011-12-01 | en_US |
| dc.description.abstract | A stimulus driver circuit for a micro-stimulator used in an implantable device is presented in this paper. For epileptic seizure control, the target of the driver was to output 30 mu A stimulus currents when the electrode impedance varied between 20 and 200 k Omega. The driver, which consisted of the output stage, control block and adaptor, was integrated in a single chip. The averaged power consumption of the stimulus driver was 0.24-0.56 mW at 800 Hz stimulation rate. Fabricated in a 0.35 mu m 3.3 V/24 V CMOS process and applied to a closed-loop epileptic seizure monitoring and controlling system, the proposed design has been successfully verified in the experimental results of Long-Evans rats with epileptic seizures. | en_US |
| dc.identifier.doi | 10.1088/1741-2560/8/6/066008 | en_US |
| dc.identifier.issn | 1741-2560 | en_US |
| dc.identifier.journal | JOURNAL OF NEURAL ENGINEERING | en_US |
| dc.identifier.uri | http://dx.doi.org/10.1088/1741-2560/8/6/066008 | en_US |
| dc.identifier.uri | https://ir.lib.nycu.edu.tw/handle/11536/14913 | |
| dc.identifier.wosnumber | WOS:000297684400021 | |
| dc.language.iso | en_US | en_US |
| dc.title | Stimulus driver for epilepsy seizure suppression with adaptive loading impedance | en_US |
| dc.type | Article | en_US |