<link rel="stylesheet" href="styles.cf390c6bfbe7555f.css">

學術出版;;Publications

Permanent URI for this communityhdl:11536/1

收集所有交通大學研究人員與學生個人或團體所發表之各項學術著作，涵蓋期刊論文、教師專書、學位論文等項。;;Collections of Publications of NCTU Researchers and Students Like Journal Papers and Thesis.

Browse

🏛️國立陽明交通大學機構典藏

Has files: YesSubject: search.filters.subject.two-dimensional materials

Search Results

Now showing 1 - 4 of 4
  • Thumbnail Image
    Item type:Item,
    Interface Engineering for High-Performance Top-Gated MoS2 Field-Effect Transistors
    (2014-09-24)
    Zou, Xuming
    ;
    Wang, Jingli
    ;
    Chiu, Chung-Hua
    ;
    Wu, Yun
    ;
    Xiao, Xiangheng
    Experimental evidence of the optimized interface engineering effects in MoS2 transistors is demonstrated. The MoS2/Y2O3/HfO2 stack offers excellent interface control. Results show that HfO2 layer can be scaled down to 9 nm, yet achieving a near-ideal sub-threshold slope (65 mv/dec) and the highest saturation current (526 mu A/mu m) of any MoS2 transistor reported to date.
  • Thumbnail Image
    Item type:Item,
    Monolayer MoSe2 Grown by Chemical Vapor Deposition for Fast Photodetection
    (2014-08-01)
    Chang, Yung-Huang
    ;
    Zhang, Wenjing
    ;
    Zhu, Yihan
    ;
    Han, Yu
    ;
    Pu, Jiang
    Monolayer molybdenum disulfide (MoS2) has become a promising building block in optoelectronics for its high photosensitivity. However, sulfur vacancies and other defects significantly affect the electrical and optoelectronic properties of monolayer MoS2 devices. Here, highly crystalline molybdenum diselenide (MoSe2) monolayers have been successfully synthesized by the chemical vapor deposition (CVD) method. Low-temperature photoluminescence comparison for MoS2 and MoSe2 monolayers reveals that the MoSe2 monolayer shows a much weaker bound exciton peak; hence, the phototransistor based on MoSe2 presents a much faster response time (<25 ms) than the corresponding 30 s for the CVD MoS2 monolayer at room temperature in ambient conditions. The images obtained from transmission electron microscopy indicate that the MoSe exhibits fewer defects than MoS2. This work provides the fundamental understanding for the differences in optoelectronic behaviors between MoSe2 and MoS2 and is useful for guiding future designs in 2D material-based optoelectronic devices.
  • Thumbnail Image
    Item type:Item,
    Large-Area Synthesis of Highly Crystalline WSe2 Mono layers and Device Applications
    (2014-01-01)
    Huang, Jing-Kai
    ;
    Pu, Jiang
    ;
    Hsu, Chang-Lung
    ;
    Chiu, Ming-Hui
    ;
    Juang, Zhen-Yu
    The monolayer transition metal dichalcogenides have recently attracted much attention owing to their potential in valleytronics, flexible and low-power electronics, and optoelectronic devices. Recent reports have demonstrated the growth of large-size two-dimensional MoS2 layers by the sulfurization of molybdenum oxides. However, the growth of a transition metal selenide monolayer has still been a challenge. Here we report that the introduction of hydrogen in the reaction chamber helps to activate the selenization of WO3, where large size WSe2 monolayer flakes or thin films can be successfully grown. The top-gated field-effect transistors based on WSe2 monolayers using ionic gels as the dielectrics exhibit ambipolar characteristics, where the hole and electron mobility values are up to 90 and 7 cm(2)/Vs, respectively. These films can be transferred onto arbitrary substrates, which may inspire research efforts to explore their properties and applications. The resistor-loaded inverter based on a WSe2 film, with a gain of similar to 13, further demonstrates its applicability for logic-circuit integrations.
  • Thumbnail Image
    Item type:Item,
    Growth of Large-Area and Highly Crystalline MoS2 Thin Layers on Insulating Substrates
    (2012-03-01)
    Liu, Keng-Ku
    ;
    Zhang, Wenjing
    ;
    Lee, Yi-Hsien
    ;
    Lin, Yu-Chuan
    ;
    Chang, Mu-Tung
    The two-dimensional layer of molybdenum disulfide (MoS2) has recently attracted much interest due to its direct-gap property and potential applications in optoelectronics and energy harvesting. However, the synthetic approach to obtain high-quality and large-area MoS2 atomic thin layers is still rare. Here we report that the high-temperature annealing of a thermally decomposed ammonium thiomolybdate layer in the presence of sulfur can produce large-area MoS2 thin layers with superior electrical performance on insulating substrates. Spectroscopic and microscopic results reveal that the synthesized MoS2 sheets are highly crystalline. The electron mobility of the bottom-gate transistor devices made of the synthesized MoS2 layer is comparable with those of the micromechanically exfoliated thin sheets from MoS2 crystals. This synthetic approach is simple, scalable, and applicable to other transition metal dichalcogenides. Meanwhile, the obtained MoS2 films are transferable to arbitrary substrates, providing great opportunities to make layered composites by stacking various atomically thin layers.