標題: 新穎多孔性氮碳化矽材料及氣隙內連接可行性之研究(II)
Novel Silicon Nitride/Carbide (SiNC)-Based Porous Etch-Stop Layer and Feasibility Assessment of Air-Gap Interconnect (II)
作者: 呂志鵬
Leu Jihperng (Jim)
國立交通大學材料科學與工程學系(所)
關鍵字: 蝕刻終止層(etch-stop layer);氣隙內連接(air-gap interconnect);多孔性氮碳化矽(silicon nitride/carbide);電漿輔助化學氣相沉積法(PECVD);旋轉塗佈法(spin-on);etch-stop layer;air-gap interconnect;porous;SiNC;PECVD;spin-on
公開日期: 2009
摘要: 超大型積體電路元件為降低尺寸縮小所帶來之RC 遲滯效應,在90奈米後段製程中 已引進低介電材料(k ~ 3.0)。而新世代超低介電材料(k < 2.5)之研發仍以多孔性的低介 電材料為主,然而因可靠度及機械強度不足之故,使其應用上仍有待解決。而較革命 性的氣隙內連接,在今年五月IBM宣佈後,再度點燃產學界研發上的競爭。而目前IBM 氣 隙內連接無法被接受之主因乃在於額外光罩費用和機械強度。為解決這些問題,本計畫 提出一種新穎的氣隙內連接結構,其中包括兩大關鍵性材料:(1)自我對準(self-aligned) 的金屬覆蓋層,如CoW(B,P),以降低電遷移情況並保護銅導線,及(2)待開發之新穎多 孔性氮碳化矽材料(PESL)。 本計畫研究目標可分為三項:(1)研究以旋轉塗佈法和電漿輔助化學氣相沉積法於低 溫(< 450°C)沉積PESL 薄膜,(2)瞭解及建立在低溫下形成nano-或meso-PESL 結構的 方法與理論,及(3)驗證新穎氣隙連接技術之可行性。 本計畫已於第一年成功組裝 PECVD 沉積系統,並使用epoxycyclohexane 和1, 3, 5-trimethyl-1, 3, 5-trivinylcyclotrisilazane 沉積PESL 薄膜,目前正致力於控制孔洞大小相 關之研究。計畫第二年將延伸前一年之研究成果,嘗試以(1)兩相式SiNC/porogen 奈米 複合材料;(2)接有乙烯基起洞劑之聚矽氮烷(polysilazane)主鏈;(3)團聯共聚物(diblock copolymer)和(4)垂直型孔洞或微通道沉積有序之PESL 薄膜,並研究其材料性質。而第 三年將於國家奈米元件實驗室製作單層Cu/low-k 試片及驗證新型氣隙內連接技術之可 行性。另預期PESL 及氣隙成果可移轉至國內半導體公司,增進國內於後段製程之研發 技術。
Development of low-k materials has been the primary effort in the backend interconnects to minimize the RC delay in the ULSI devices. Evolutional approach of ultra-low k materials (k < 2.5) focuses on porous materials through the incorporation of sacrificial, low- or high-temperature porogens, which still have challenging issues in barrier reliability and mechanical integrity. In contrast, air-gap interconnect is a revolutionary approach capable of delivering keffective close to 1. IBM’s announcement in May, 2007 on air-gap microprocessors has rekindled the pursuit of air-gap interconnects in the microelectronic industry as well as in the academia. Noticeably, additional masks and mechanical reliability are prohibitive to its acceptance for mass production. To eliminate the need of additional masks, we propose a novel air-gap interconnect architecture which involves two critical materials: (1) a well-known metal cap layer and (2) a novel porous etch-stop SiNC layer (PESL). Metal cap layer such as CoW(B,P), which is self-aligned through selective electroless deposition onto Cu lines, can enhance electromigraion resistance and provide protection to Cu lines during any post processing step for air-gap. Meanwhile, PESL, an enabling material technology, can provide permeable microchannels in the plasma of the sacrificial interlayer dielectric (ILD) for forming the air-gap. The objectives of this research proposal are three-folds: (1) to develop a spin-on and a PECVD low-temperature PESL with required selectivity (>10:1) and permeability for removing the sacrificial ILD between the metal lines to form air-gap interconnect, (2) to establish the fundamental understanding and theory of nano- and meso-porous structures in PESL thin films at low temperature < 450 oC, and (3) to demonstrate the feasibility of air-gap interconnect. In 2007-2008, a home-built PECVD system has been established to successfully deposit and study SiCNx and porous SiCNx using 1, 3, 5-trimethyl-1, 3, 5-trivinylcyclotrisilazane (VSZ) and epoxycyclohexane as a matrix and a porogen, respectively. The execution of this project is on track to explore methods in controlling various pore sizes using high MW porogen in nanocomposite and/or grafting onto a polysilazane. In 2009-2010, we propose to extend our PECVD PESL research to spin-on PESL materials by taking advantage of its ease in tailor-making of porous structures, based on approaches: (1) two-phase SiNC/porogen nanocomposites, (2) grafting a porogen onto a polysilazane precursor with vinyl groups, and (3) forming a diblock copolymer for ordered pore structure, and (4) vertical pores or microchannels in PESL. During the 3rd year, air-gap interconnect will be demonstrated through the fabrication of 1-level Cu test wafers in National Nano-Device Lab. Moreover, the methods for forming a permeable PESL and the kinetics of ILD removal by plasma etching through PESL will be investigated. This enabling novel PESL materials and air-gap interconnect technology are expected to contribute significantly to the backend technology leadership for major semiconductor companies in Taiwan.
官方說明文件#: NSC98-2221-E009-177
URI: http://hdl.handle.net/11536/101734
https://www.grb.gov.tw/search/planDetail?id=1909747&docId=316689
顯示於類別:研究計畫