完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.author | Kuo, J.-T. | en_US |
dc.contributor.author | Wu, M.-H. | en_US |
dc.date.accessioned | 2014-12-08T15:13:58Z | - |
dc.date.available | 2014-12-08T15:13:58Z | - |
dc.date.issued | 2007-06-01 | en_US |
dc.identifier.issn | 1751-8725 | en_US |
dc.identifier.uri | http://dx.doi.org/10.1049/iet-map:20060130 | en_US |
dc.identifier.uri | http://hdl.handle.net/11536/10759 | - |
dc.description.abstract | Corrugated coupled stages are devised to design bandpass filters with multispurious suppression. Through two-port analysis, the suppression is found critically dependent on equality of the even and odd mode phase velocities at even harmonics of design frequency f(o). Quarter-wave (lambda/4) corrugated stages are tuned to allocate inherent transmission zeros at both 2f(o), and 4f(o), and 6f(o) for some structures, so that the circuit is free of spurious at these frequencies. Coupled stages with proper coupling lengths are arranged to cancel unwanted peaks at 3f(o), 6f(o), and 7f(o), and tapped input/output scheme is employed to tackle those at 3f(o) and 5f(o). Measured data of designed filters show rejection levels better than 30 dB in upper stopband. Three circuits are fabricated and measured to demonstrate the idea. | en_US |
dc.language.iso | en_US | en_US |
dc.title | Corrugated parallel-coupled line bandpass filters with multispurious suppression | en_US |
dc.type | Article | en_US |
dc.identifier.doi | 10.1049/iet-map:20060130 | en_US |
dc.identifier.journal | IET MICROWAVES ANTENNAS & PROPAGATION | en_US |
dc.citation.volume | 1 | en_US |
dc.citation.issue | 3 | en_US |
dc.citation.spage | 718 | en_US |
dc.citation.epage | 722 | en_US |
dc.contributor.department | 電信工程研究所 | zh_TW |
dc.contributor.department | Institute of Communications Engineering | en_US |
dc.identifier.wosnumber | WOS:000247853300028 | - |
dc.citation.woscount | 6 | - |
顯示於類別: | 期刊論文 |