Optimization of multi-response processes using the VIKOR method
檔案
- 000244335600001.pdf (243.2 KB, Adobe PDF)
日期
2007-02-01
類型
系所
期刊名稱
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
卷期與頁次
第 31 卷第 11-12 期,頁 1049–1057
ISSN
0268-3768
語言
英文
摘要
Design of experiments and Taguchi methods are extensively adopted as off- line quality improvement techniques in industry. However, these methods were developed to optimize single-response processes. In many situations, multiple responses must be optimized simultaneously, since some product designs, especially in the integrated circuit industry, are becoming increasingly complex to meet customers' demands. Although several procedures for optimizing multi- response processes have been developed in recent years, the associated quality measurement indices do not consider variations in the relative quality losses of multiple responses. These procedures may therefore result in an optimization in which quality losses associated with a few responses are very small but those associated with others are very large, even if the overall average quality loss is small. Such an optimization with a large variation of quality losses among the responses is usually unacceptable to engineers. Accordingly, this study employs the VIKOR method, which is a compromise ranking method used for multicriteria decision making ( MCDM), to optimize the multiresponse process. The proposed method considers both the mean and the variation of quality losses associated with several multiple responses, and ensures a small variation in quality losses among the responses, along with a small overall average loss. Two case studies of plasma- enhanced chemical vapor deposition and copper chemical mechanical polishing demonstrate the effectiveness of the proposed method.
關鍵詞
multi-response processmulticriteria decision makingVIKOR methodTaguchi methodquality lossoptimization所屬典藏
期刊論文引用此條目
Tong, L.-I., Chen, C.-C., & Wang, C.-H. (2007). Optimization of multi-response processes using the VIKOR method. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 31(11-12), 1049–1057. https://doi.org/10.1007/s00170-005-0284-6
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/11174