Advanced Cu chemical displacement technique for SiO2-based electrochemical metallization ReRAM application
檔案
- 000347643000004.pdf (2.29 MB, Adobe PDF)
日期
2014-10-28
作者
類型
系所
期刊名稱
NANOSCALE RESEARCH LETTERS
ISSN
1556-276X
語言
英文
摘要
This study investigates an advanced copper (Cu) chemical displacement technique (CDT) with varying the chemical displacement time for fabricating Cu/SiO2-stacked resistive random-access memory (ReRAM). Compared with other Cu deposition methods, this CDT easily controls the interface of the Cu-insulator, the switching layer thickness, and the immunity of the Cu etching process, assisting the 1-transistor-1-ReRAM (1T-1R) structure and system-on-chip integration. The modulated shape of the Cu-SiO2 interface and the thickness of the SiO2 layer obtained by CDT-based Cu deposition on SiO2 were confirmed by scanning electron microscopy and atomic force microscopy. The CDT-fabricated Cu/SiO2-stacked ReRAM exhibited lower operation voltages and more stable data retention characteristics than the control Cu/SiO2-stacked sample. As the Cu CDT processing time increased, the forming and set voltages of the CDT-fabricated Cu/SiO2-stacked ReRAM decreased. Conversely, decreasing the processing time reduced the on-state current and reset voltage while increasing the endurance switching cycle time. Therefore, the switching characteristics were easily modulated by Cu CDT, yielding a high performance electrochemical metallization (ECM)-type ReRAM.
所屬典藏
期刊論文引用此條目
Chin, F.-T., Lin, Y.-H., You, H.-C., Yang, W.-L., Lin, L.-M., Hsiao, Y.-P., Ko, C.-M., & Chao, T.-S. (2014). Advanced Cu chemical displacement technique for SiO2-based electrochemical metallization ReRAM application. NANOSCALE RESEARCH LETTERS. https://doi.org/10.1186/1556-276X-9-592
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/124284