完整後設資料紀錄
DC 欄位語言
dc.contributor.authorChen, Shih-Hsunen_US
dc.contributor.authorWang, Chiu-Yenen_US
dc.contributor.authorChen, Yung-Changen_US
dc.contributor.authorHun, Chien-Wanen_US
dc.contributor.authorChen, Shih-Fanen_US
dc.contributor.authorYang, Sheng-Minen_US
dc.date.accessioned2015-07-21T08:29:46Z-
dc.date.available2015-07-21T08:29:46Z-
dc.date.issued2015-06-01en_US
dc.identifier.issn0167-577Xen_US
dc.identifier.urihttp://dx.doi.org/10.1016/j.matlet.2015.02.082en_US
dc.identifier.urihttp://hdl.handle.net/11536/124636-
dc.description.abstractA simple method to prepare aluminum nanowires was achieved by using the injection molding process in the air. The Al nanowires were made with the average diameter of 60 nm and length of several micrometers. The difference between mold dimension and nanowires was caused by removing the outer oxide shell of Al nanowires. XRD, EDS and SAED results showed that the Al crystalline nanowires were fabricated exactly. The proposed concept successfully established a simple and low-cost method to have high-temperature and soft nano-materials under the non-vacuum surroundings. (C) 2015 Elsevier B.V. All rights reserved.en_US
dc.language.isoen_USen_US
dc.subjectCasten_US
dc.subjectMetal forming and shapingen_US
dc.subjectNanocrystalline materialsen_US
dc.subjectStructuralen_US
dc.titleFabrication of pure aluminum nanowires by using injection molding process in ambient airen_US
dc.typeArticleen_US
dc.identifier.doi10.1016/j.matlet.2015.02.082en_US
dc.identifier.journalMATERIALS LETTERSen_US
dc.citation.volume148en_US
dc.citation.spage30en_US
dc.citation.epage33en_US
dc.contributor.department材料科學與工程學系zh_TW
dc.contributor.departmentDepartment of Materials Science and Engineeringen_US
dc.identifier.wosnumberWOS:000353097100008en_US
dc.citation.woscount0en_US
顯示於類別:期刊論文