A study on NiGe-contacted Ge n(+)/p Ge shallow junction prepared by dopant segregation technique

檔案

本條目沒有附加檔案。

至出版者網站查看(DOI) ›

日期

2015-05-01

類型

期刊名稱

SOLID-STATE ELECTRONICS

卷期與頁次

第 107 卷,頁 40–46

ISSN

0038-1101

語言

英文

摘要

In this work, the effect of dopant segregation on the NiGe/n-Ge contact is studied by experiments and first-principles calculations. Both Al-contacted and NiGe-contacted n(+)/p junctions were fabricated. Phosphorus and arsenic ions were Implanted Before Germanide (IBG) formation or Implanted After Germanide (IAG) formation. The NiGe-contacted junction always exhibit higher forward current than the Al-contacted junction due to dopant segregation. First principles calculations predict that phosphorus atoms tend to segregate on both NiGe side and Ge side while arsenic atoms tend to segregate at Ge side. Since phosphorus has higher activation level and lower diffusion coefficient than arsenic, we propose a phosphorus IBG + arsenic IAG process. Shallow n(+)/p junction with junction depth 90 nm below the NiGe/Ge interface is achieved. The lowest and average contact resistivity is 2 x 10(-6) Omega cm(2) and 6.7 x 10(-6) Omega cm(2), respectively. Methods which can further reduce the junction depth and contact resistivity are suggested. (C) 2015 Elsevier Ltd. All rights reserved.

所屬典藏

期刊論文
顯示完整詮釋資料 統計資料

引用此條目

Tsui, B.-Y., Shih, J.-J., Lin, H.-C., & Lin, C.-Y. (2015). A study on NiGe-contacted Ge n(+)/p Ge shallow junction prepared by dopant segregation technique. SOLID-STATE ELECTRONICS, 107, 40–46. https://doi.org/10.1016/j.sse.2015.02.017

BibTeX RIS

引用文字依 APA 第 7 版格式自動產生,使用前請再核對。

分享

永久網址:https://ir.lib.nycu.edu.tw/handle/11536/124664