Full metadata record
DC FieldValueLanguage
dc.contributor.authorLin, Chiao-Chienen_US
dc.contributor.authorTzou, Ying-Yuen_US
dc.date.accessioned2015-07-21T08:31:20Z-
dc.date.available2015-07-21T08:31:20Z-
dc.date.issued2014-01-01en_US
dc.identifier.isbn978-1-4799-2705-0en_US
dc.identifier.issn2150-6078en_US
dc.identifier.urihttp://hdl.handle.net/11536/124912-
dc.description.abstractThis paper presents a robust sensorless startup control method with self-commissioning for permanent magnet motors for smooth ramping speed up without reversing oscillations. Low cost sinusoidal PMSM motors used for fan and blower applications may have large parameter variations and static friction uncertainties. A reliable startup control with smooth operation thus becomes an indispensable requirement for practical applications. A self-commissioning strategy is developed to identify the fan motor parameters when a new application is initiated. These identified parameters are stored in an EEPROM and are used for the field oriented sensorless control of the of the PMSM motor drive. Based on the identified motor parameters, a start-up scheme will apply a series of voltage pulses with proper time durations to each stator winding and the corresponding peak currents are measured for the detection of initial commutation state of the rotor. The proposed scheme will not cause visible rotor vibrations and audio noises during the detection process. The sensorless startup with self-commissioning scheme has been implemented based on a single-chip MCU controller (STM32F0). Experimental results reveal that the proposed scheme can achieve reliable and smooth startup with robust performances.en_US
dc.language.isoen_USen_US
dc.subjectInitial rotor position detectionen_US
dc.subjectpermanent magnet motorsen_US
dc.subjectself-commissioningen_US
dc.subjectsensorless start-up controlen_US
dc.titleRobust Startup Control of Sensorless PMSM Drives with Self-Commissioningen_US
dc.typeProceedings Paperen_US
dc.identifier.journal2014 INTERNATIONAL POWER ELECTRONICS CONFERENCE (IPEC-HIROSHIMA 2014 - ECCE-ASIA)en_US
dc.citation.spage3072en_US
dc.citation.epage3078en_US
dc.contributor.department電控工程研究所zh_TW
dc.contributor.departmentInstitute of Electrical and Control Engineeringen_US
dc.identifier.wosnumberWOS:000347109202158en_US
dc.citation.woscount0en_US
Appears in Collections:Conferences Paper