Full metadata record
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Wu, J | en_US |
dc.contributor.author | Wang, YL | en_US |
dc.contributor.author | Kuo, CT | en_US |
dc.date.accessioned | 2014-12-08T15:17:21Z | - |
dc.date.available | 2014-12-08T15:17:21Z | - |
dc.date.issued | 2006-02-24 | en_US |
dc.identifier.issn | 0257-8972 | en_US |
dc.identifier.uri | http://dx.doi.org/10.1016/j.surfcoat.2005.07.031 | en_US |
dc.identifier.uri | http://hdl.handle.net/11536/12616 | - |
dc.description.abstract | Fluorine-doped silicon oxide (SiOF) films prepared by plasma enhanced chemical vapor deposition would generate precipitates on the film surface during exposure to air. The chemical and structural changes of SiOF films during the precipitation process were investigated under various fluorine-doping concentrations in SiOF films. Film composition depth profiles characterized by secondary ion mass spectrometer (SIMS) indicate uneven fluorine distribution within SiOF film after precipitation. During the precipitation process, the Fourier transform infrared (FTIR) spectra of SiOF films showed the decreasing trend in the intensities of Si-F-n (n = 1, 2...) bonding peak, whereas an opposing trend in Si-OH bonding as well as the shoulder peak of Si-O stretching mode were observed. Moreover, the formation of the precipitates lead to lower refractive index, a relief in compressive residual stress, and higher wet etch rate of SiOF films. The structural changes of SiOF films due to the formation of precipitates were extensively discussed. (c) 2005 Elsevier B.V. All rights reserved. | en_US |
dc.language.iso | en_US | en_US |
dc.subject | fluorine-doped silicon oxide | en_US |
dc.subject | precipitation | en_US |
dc.subject | defects | en_US |
dc.subject | Si-F bond | en_US |
dc.title | Precipitates formation and its impact on the structure of plasma-deposited fluorinated silicon oxide films | en_US |
dc.type | Article; Proceedings Paper | en_US |
dc.identifier.doi | 10.1016/j.surfcoat.2005.07.031 | en_US |
dc.identifier.journal | SURFACE & COATINGS TECHNOLOGY | en_US |
dc.citation.volume | 200 | en_US |
dc.citation.issue | 10 | en_US |
dc.citation.spage | 3303 | en_US |
dc.citation.epage | 3308 | en_US |
dc.contributor.department | 材料科學與工程學系 | zh_TW |
dc.contributor.department | Department of Materials Science and Engineering | en_US |
dc.identifier.wosnumber | WOS:000235427000040 | - |
Appears in Collections: | Conferences Paper |
Files in This Item:
If it is a zip file, please download the file and unzip it, then open index.html in a browser to view the full text content.