Full metadata record
DC FieldValueLanguage
dc.contributor.authorFu, Yu-Minen_US
dc.contributor.authorChen, Che-Yuen_US
dc.contributor.authorQian, Xin-Hongen_US
dc.contributor.authorCheng, Yu-Tingen_US
dc.contributor.authorWu, Chung-Yuen_US
dc.contributor.authorSun, Jui-Shengen_US
dc.contributor.authorHuang, Chien-Chunen_US
dc.contributor.authorHu, Chao-Kaien_US
dc.date.accessioned2017-04-21T06:49:19Z-
dc.date.available2017-04-21T06:49:19Z-
dc.date.issued2015en_US
dc.identifier.isbn978-1-4244-9270-1en_US
dc.identifier.issn1557-170Xen_US
dc.identifier.urihttp://hdl.handle.net/11536/134324-
dc.description.abstractIn this paper, a microfabricated inductive coil comprising of 125-turn coil windings and a MnZn-based magnetic core in a volume of 200 mm(3) is presented for the magnetic neural stimulation in a spinal cord. The coil winding with the parallel-linkage design instead of the typical serial-linkage one is proposed not only to provide better design flexibility to the current mode driving circuit but also to simplify the fabrication process of the 3-D inductive coil, which can further advance the coil miniaturization. Experimental results show the microcoil with a 1.5 A, 1 kHz square-wave current input can induce a voltages of 220 mu V on the conducting wire with an impedance of similar to 0.2 Omega @ kHz, 1 mm separation.en_US
dc.language.isoen_USen_US
dc.titleA Microfabricated Coil for Implantable Applications of Magnetic Spinal Cord Stimulationen_US
dc.typeProceedings Paperen_US
dc.identifier.journal2015 37TH ANNUAL INTERNATIONAL CONFERENCE OF THE IEEE ENGINEERING IN MEDICINE AND BIOLOGY SOCIETY (EMBC)en_US
dc.citation.spage6912en_US
dc.citation.epage6915en_US
dc.contributor.department電子工程學系及電子研究所zh_TW
dc.contributor.departmentDepartment of Electronics Engineering and Institute of Electronicsen_US
dc.identifier.wosnumberWOS:000371717207047en_US
dc.citation.woscount0en_US
Appears in Collections:Conferences Paper