完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.author | Kao, H. L. | en_US |
dc.contributor.author | Yang, D. Y. | en_US |
dc.contributor.author | Chin, Albert | en_US |
dc.contributor.author | McAlister, S. P. | en_US |
dc.date.accessioned | 2017-04-21T06:49:44Z | - |
dc.date.available | 2017-04-21T06:49:44Z | - |
dc.date.issued | 2007 | en_US |
dc.identifier.isbn | 978-1-4244-0687-6 | en_US |
dc.identifier.issn | 0149-645X | en_US |
dc.identifier.uri | http://hdl.handle.net/11536/134448 | - |
dc.description.abstract | A dual-band, low phase noise, low power and small sized voltage-controlled oscillator (VCO) with a variable inductor and switched resonator is described. The dual-band VCO operated near 2.4 GHz and 5 GHz with a phase noise of 120 and -121 dBc/Hz at a 1 MHz offset and a tuning range of 250 MHz and 1.2 GHz, respectively. The power consumption was 1.5/1.8 mW for 2.4/5 GHz operations. The total size the VCO was only 1.06 mm(2), which was achieved by using one inductor which was connected with a switch to give good dual-band operation and performance. | en_US |
dc.language.iso | en_US | en_US |
dc.subject | dual band | en_US |
dc.subject | phase noise | en_US |
dc.subject | switched inductors | en_US |
dc.subject | switched resonators | en_US |
dc.subject | phase noise | en_US |
dc.subject | VCO | en_US |
dc.title | A 2.4/5 GHz dual-band VCO using a variable inductor and switched resonator | en_US |
dc.type | Proceedings Paper | en_US |
dc.identifier.journal | 2007 IEEE/MTT-S INTERNATIONAL MICROWAVE SYMPOSIUM DIGEST, VOLS 1-6 | en_US |
dc.citation.spage | 1528 | en_US |
dc.citation.epage | + | en_US |
dc.contributor.department | 電機學院 | zh_TW |
dc.contributor.department | College of Electrical and Computer Engineering | en_US |
dc.identifier.wosnumber | WOS:000250827404010 | en_US |
dc.citation.woscount | 0 | en_US |
顯示於類別: | 會議論文 |