Full metadata record
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Chiu, KC | en_US |
dc.contributor.author | Huang, DR | en_US |
dc.contributor.author | Shieh, HPD | en_US |
dc.date.accessioned | 2014-12-08T15:19:09Z | - |
dc.date.available | 2014-12-08T15:19:09Z | - |
dc.date.issued | 2005-05-15 | en_US |
dc.identifier.issn | 0021-8979 | en_US |
dc.identifier.uri | http://dx.doi.org/10.1063/1.1851430 | en_US |
dc.identifier.uri | http://hdl.handle.net/11536/13719 | - |
dc.description.abstract | Using traditional methods, a permanent magnet multipole component magnetized with a magnetic pole pitch of less than 1 mm is very difficult to achieve and a costly, complicated magnetization system is required. In this paper, the optimal design of a fine magnetic pole pitch of less than 1 mm fabricated on a printed circuit board has been successfully investigated and demonstrated. An optimal magnetic pole pitch having large variation and strength in magnetic-flux density was obtained. The characteristics of the optimal magnetic pole pitch are good for signal detection and processing. The measured values of the magnetic-flux density in the z component are in agreement with the calculated values. (c) 2005 American Institute of Physics. | en_US |
dc.language.iso | en_US | en_US |
dc.title | Optimal design of fine magnetic pole pitch fabricated on printed circuit board | en_US |
dc.type | Article; Proceedings Paper | en_US |
dc.identifier.doi | 10.1063/1.1851430 | en_US |
dc.identifier.journal | JOURNAL OF APPLIED PHYSICS | en_US |
dc.citation.volume | 97 | en_US |
dc.citation.issue | 10 | en_US |
dc.citation.epage | en_US | |
dc.contributor.department | 光電工程學系 | zh_TW |
dc.contributor.department | Department of Photonics | en_US |
dc.identifier.wosnumber | WOS:000230168500327 | - |
Appears in Collections: | Conferences Paper |
Files in This Item:
If it is a zip file, please download the file and unzip it, then open index.html in a browser to view the full text content.