完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.author | Wu, Hsin-Chieh | en_US |
dc.contributor.author | Chen, Tin-Chih Toly | en_US |
dc.date.accessioned | 2018-08-21T05:53:37Z | - |
dc.date.available | 2018-08-21T05:53:37Z | - |
dc.date.issued | 2018-01-01 | en_US |
dc.identifier.issn | 1355-2546 | en_US |
dc.identifier.uri | http://dx.doi.org/10.1108/RPJ-02-2017-0031 | en_US |
dc.identifier.uri | http://hdl.handle.net/11536/144922 | - |
dc.description.abstract | Purpose - This study aims to investigate issues of quality and quality control (QC) in three-dimensional (3D) printing by reviewing past work and current practices. Possible future developments are also discussed. Design/methodology/approach - After a discussion of the major quality dimensions of 3D-printed objects, the applications of some QC techniques at various stages of the product life cycle (including product design, process planning, incoming QC, in-process QC and outgoing QC) are introduced. Findings - The application of QC techniques to 3D printing is not uncommon. Some techniques (e.g. cause-and-effect analysis) have been applied extensively; others, such as design of experiments, have not been used accurately and completely and therefore cannot optimize quality. Taguchi's method and control charts can enhance the quality of 3D-printed objects; however, these techniques require repetitive experimentation, which may not fit the work flow of 3D printing. Originality/value - Because quality issues may discourage customers from buying 3D-printed products, enhancing 3D printing quality is imperative. In addition, 3D printing can be used to manufacture diverse products with a reduced investment in machines, tools, assembly and materials. Production economics issues can be addressed by successfully implementing QC. | en_US |
dc.language.iso | en_US | en_US |
dc.subject | Quality | en_US |
dc.subject | 3D printing | en_US |
dc.subject | Quality control | en_US |
dc.title | Quality control issues in 3D-printing manufacturing: a review | en_US |
dc.type | Article | en_US |
dc.identifier.doi | 10.1108/RPJ-02-2017-0031 | en_US |
dc.identifier.journal | RAPID PROTOTYPING JOURNAL | en_US |
dc.citation.volume | 24 | en_US |
dc.citation.spage | 607 | en_US |
dc.citation.epage | 614 | en_US |
dc.contributor.department | 工業工程與管理學系 | zh_TW |
dc.contributor.department | Department of Industrial Engineering and Management | en_US |
dc.identifier.wosnumber | WOS:000431033000010 | en_US |
顯示於類別: | 期刊論文 |