Coplanar waveguide-fed uniplanar bow-tie antenna

doi:10.1109/8.560350

Full metadata record

DC Field	Value	Language
dc.contributor.author	Lin, YD	en_US
dc.contributor.author	Tsai, SN	en_US
dc.date.accessioned	2019-04-02T06:00:27Z	-
dc.date.available	2019-04-02T06:00:27Z	-
dc.date.issued	1997-02-01	en_US
dc.identifier.issn	0018-926X	en_US
dc.identifier.uri	http://dx.doi.org/10.1109/8.560350	en_US
dc.identifier.uri	http://hdl.handle.net/11536/149431	-
dc.description.abstract	The design of coplanar waveguide (CPW)-fed bow-tie antenna for the 2.4-GHz ISM band is described in this letter. A coplanar waveguide-to-coplanar strips (CPW-to-CPS) balun is used to obtain the balanced feed line for the printed bow tie. Analysis method based on the mixed potential integral equation method is used to characterize the input characteristics of the bow-tie antenna. Obtained numerical results are in good agreement with experimental data. Through experiments with bow-tie antennas of various extended angles, the bow-tie antenna with a 90 degrees extended angle exhibits the widest bandwidth in the desired frequency band which has a bandwidth of 17% for VSWR <1.5:1.	en_US
dc.language.iso	en_US	en_US
dc.subject	coplanar waveguides	en_US
dc.title	Coplanar waveguide-fed uniplanar bow-tie antenna	en_US
dc.type	Article	en_US
dc.identifier.doi	10.1109/8.560350	en_US
dc.identifier.journal	IEEE TRANSACTIONS ON ANTENNAS AND PROPAGATION	en_US
dc.citation.volume	45	en_US
dc.citation.spage	305	en_US
dc.citation.epage	306	en_US
dc.contributor.department	電信工程研究所	zh_TW
dc.contributor.department	Institute of Communications Engineering	en_US
dc.identifier.wosnumber	WOS:A1997WG06200014	en_US
dc.citation.woscount	67	en_US
Appears in Collections:	Articles