標題: High-Gain Patch-Fed 3D-Printing Fresnel Zone Plate Lens Antenna for 60-GHz Communications
作者: Chi, Pei-Ling
Pao, Chi-Hsien
Huang, Ming-Hui
Yang, Tao
電機工程學系
Department of Electrical and Computer Engineering
關鍵字: 3D printing;60 GHz;dielectric constant;Fresnel zone plate lens;patch
公開日期: 1-Jan-2018
摘要: This paper presents a high-gain Fresnel zone plate lens antenna designed for 60-GHz systems. Manufactured with the 3D printing technology and fed by a simple patch on the substrate, the proposed Fresnel lens antenna allows for low-cost fabrication and easy integration with planar circuitry. Experimental results show that the prototype antenna can achieve a 10-dB impedance bandwidth from 56.6 GHz to > 67 GHz and the peak gain of 14 similar to 20 dBi across the bandwidth, corresponding to gain enhancement of 9.2 similar to 10.9 dB.
URI: http://hdl.handle.net/11536/151090
ISSN: 1522-3965
期刊: 2018 IEEE ANTENNAS AND PROPAGATION SOCIETY INTERNATIONAL SYMPOSIUM ON ANTENNAS AND PROPAGATION & USNC/URSI NATIONAL RADIO SCIENCE MEETING
起始頁: 597
結束頁: 598
Appears in Collections:Conferences Paper