Characterization and fabrication of chimney-shaped metal field emitters
檔案
- A1996TU37000055.pdf (735.4 KB, Adobe PDF)
日期
1996-01-01
類型
系所
期刊名稱
JAPANESE JOURNAL OF APPLIED PHYSICS PART 1-REGULAR PAPERS SHORT NOTES & REVIEW PAPERS
卷期與頁次
第 35 卷第 1A 期,頁 308–312
ISSN
0021-4922
語言
英文
摘要
A novel fabrication technology has been successully developed for chimney-shaped metal field emitters in order to improve the electrical characterisitcs of field-emission devices. This technology is based on anisotropic dry etching and sputtering deposition of metal film as well as wet etching of the attached silicon. It enables easy fabrication of chimney-shaped field emitters with excellent uniformity and high reproducibility. The anode current of the chimney-shaped Cr field emitter array (FEA) is 36.3 mu-A at the applied voltage of 1100 V and the threshold voltage V-T, defined as that for which the anode current I-n reaches 1 mu-A is 787 V. The chimney-shaped Cr FEA emits a current thirty times higher than that from the cone-shaped Cr-clad FEA at the applied voltage of 1100 V. This can be attributed to the presence of many sharp tips along the edge of the chimney-shaped emitter. The degradation phenomenon is not observed because compensation occurs between these many sharp tips. Another merit of this technique is that only one photolithography mask is needed during processing.
所屬典藏
期刊論文引用此條目
Cheng, H., Wang, C., Ku, T., & Hsieh, I. (1996). Characterization and fabrication of chimney-shaped metal field emitters. JAPANESE JOURNAL OF APPLIED PHYSICS PART 1-REGULAR PAPERS SHORT NOTES & REVIEW PAPERS, 35(1A), 308–312. https://doi.org/10.1143/JJAP.35.308
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/1571