標題: DESIGN AND EVALUATION OF A PLATE-TO-PLATE THERMOPHORETIC PRECIPITATOR
作者: TSAI, CJ
LU, HC
交大名義發表
環境工程研究所
National Chiao Tung University
Institute of Environmental Engineering
公開日期: 1-Feb-1995
摘要: A plate-to-plate thermophoretic precipitator with high particle collection efficiency has been designed and tested. The precipitator consists of two flat plates separated by a 0.38-mm thermal insulating shim. The top plate is heated by a constant high-temperature water flow while the bottom plate is cooled by a constant low-temperature water flow. Through this forced convective heat transfer arrangement, a high and uniform temperature gradient is achieved between the two plates, where submicron aerosol particles can be collected efficiently and uniformly in the direction of the air flow. The precipitator was tested in the laboratory using NaCl and sodium fluorescein monodisperse test particles. When the temperature gradient ranges from 502-degrees to 879-degrees-C/cm and the Knudsen number ranges from 0.27 to 3.5, the experimental data show that the present precipitator collects submicron particles efficiently. Among previous theories, the thermophoretic velocity equation proposed by Talbot et al. (1980) is found to fit very well with the present experimental data.
URI: http://hdl.handle.net/11536/2066
ISSN: 0278-6826
期刊: AEROSOL SCIENCE AND TECHNOLOGY
Volume: 22
Issue: 2
起始頁: 172
結束頁: 180
Appears in Collections:Articles


Files in This Item:

  1. A1995QJ09100005.pdf

If it is a zip file, please download the file and unzip it, then open index.html in a browser to view the full text content.