Fabrication of fresnel lens by glass molding technique

doi:10.1007/s10043-013-0035-0

完整後設資料紀錄

DC 欄位	值	語言
dc.contributor.author	Huang, Chien-Yao	en_US
dc.contributor.author	Chen, Chun-Chieh	en_US
dc.contributor.author	Chou, Hsiao-Yu	en_US
dc.contributor.author	Chou, Chang-Pin	en_US
dc.date.accessioned	2014-12-08T15:30:25Z	-
dc.date.available	2014-12-08T15:30:25Z	-
dc.date.issued	2013-03-01	en_US
dc.identifier.issn	1340-6000	en_US
dc.identifier.uri	http://dx.doi.org/10.1007/s10043-013-0035-0	en_US
dc.identifier.uri	http://hdl.handle.net/11536/21752	-
dc.description.abstract	In this paper, we describe the fabrication of a Fresnel lens with a diameter of 15mm by a glass molding technique. Tungsten carbide and K-CSK120 were used as the materials of the mold and lens, respectively. The optimal parameters determined for the molding process included a molding temperature of 560 A degrees C, a molding force of 300 N, a temperature holding time of 180 s, and a cooling rate of 18.5 A degrees C/min.	en_US
dc.language.iso	en_US	en_US
dc.subject	Fresnel lens	en_US
dc.subject	glass molding	en_US
dc.subject	diamond grinding	en_US
dc.subject	K-CSK120	en_US
dc.title	Fabrication of fresnel lens by glass molding technique	en_US
dc.type	Article	en_US
dc.identifier.doi	10.1007/s10043-013-0035-0	en_US
dc.identifier.journal	OPTICAL REVIEW	en_US
dc.citation.volume	20	en_US
dc.citation.issue	2	en_US
dc.citation.spage	202	en_US
dc.citation.epage	204	en_US
dc.contributor.department	機械工程學系	zh_TW
dc.contributor.department	Department of Mechanical Engineering	en_US
dc.identifier.wosnumber	WOS:000316821000023	-
dc.citation.woscount	1	-
顯示於類別：	期刊論文

文件中的檔案：

000316821000023.pdf

若為 zip 檔案，請下載檔案解壓縮後，用瀏覽器開啟資料夾中的 index.html 瀏覽全文。