標題: Effect of morphology of mesoporous silica on characterization of protic ionic liquid-based composite membranes
作者: Ye, Yun-Sheng
Liang, Gao-Wei
Chen, Bo-Han
Shen, Wei-Chung
Tseng, Chi-Yung
Cheng, Ming-Yao
Rick, John
Huang, Yao-Jheng
Chang, Feng-Chih
Hwang, Bing-Joe
應用化學系
Department of Applied Chemistry
關鍵字: Ionic liquid;Proton exchange membrane;Mesoporous material;Fuel cells;In situ photo crosslinking;Morphology
公開日期: 1-七月-2011
摘要: Effects caused by the morphology of mesoporous silica on the characterization of protic ionic liquid-based composite membranes for anhydrous proton exchange membrane applications are investigated. Two types of SBA15 materials with platelet and fiberlike morphologies are synthesized and incorporated into a mixture of polymerizable monomers together with an ionic liquid (IL)[1-butyl-3-methylimidazolium bis(trifluoromethane sulfone)imide (BMIm-TFSI)] to form new conducting membranes using an in situ photo crosslinking process. Incorporation of a defined amount of fiber-shaped SBA 15 and platelet 15 significantly increases the ionic conductivity to between two and three times that of a plain poly(methyl methacrylate) (PMMA)/IL membrane (2.3 mS cm(-1)) at 160 degrees C. The protic ionic liquid (PIL) retention ability of the membranes is increased by the capillary forces introduced by the mesoporous silica materials, while ionic conductivity loss after leaching test is retarded. The highest ionic conductivity (5.3 mS cm(-1)) is obtained by incorporating 5 wt% of P-SBA 15 in the membrane to about six times that of plain PMMA/IL membrane (0.9 mS cm(-1)) at 160 degrees C after leaching test. (C) 2011 Elsevier B.V. All rights reserved.
URI: http://dx.doi.org/10.1016/j.jpowsour.2011.02.066
http://hdl.handle.net/11536/22286
ISSN: 0378-7753
DOI: 10.1016/j.jpowsour.2011.02.066
期刊: JOURNAL OF POWER SOURCES
Volume: 196
Issue: 13
起始頁: 5408
結束頁: 5415
顯示於類別:期刊論文


文件中的檔案:

  1. 000291144000005.pdf

若為 zip 檔案,請下載檔案解壓縮後,用瀏覽器開啟資料夾中的 index.html 瀏覽全文。