標題: A Novel Miniature Thermomagnetic Energy Harvester
作者: Chen, Chin-Chung
Chung, Tien-Kan
Cheng, Chi-Cheng
Tseng, Chia-Yuan
機械工程學系
Department of Mechanical Engineering
關鍵字: Energy Harvester;Power Generator;Thermal;Magnetic;Piezoelectric
公開日期: 2014
摘要: Nowadays, thermal-energy-harvesting is an important research topic for powering wireless sensors. Among numerous thermal-energy-harvesting approaches, some researchers demonstrated novel thermomagnetic-energy harvesters to convert a thermal-energy from an ambient temperature-difference to an electrical-output to power the sensors. However, the harvesters are too bulky to be integrated with the sensors embedded in tiny mechanical-structures for some structural-health-monitoring applications. Therefore, miniaturized harvesters are needed. Hence, we demonstrate a miniature thermomagnetic-energy harvester. The harvester consists of CuBe-beams, PZT-piezoelectric-sheet, Gd-soft-magnet, NdFeB-hard-magnet, and mechanical-frame. The piezoelectric-sheet and soft-magnet is bounded at fixed-end and free-end of the beams, respectively. The mechanical-frame assembles the beams and hard-magnet. The lengthxwidthxthickness of the harvester is 2.5cmx1.7cmx1.5cm. According to this, our harvester is 20-times smaller than the other harvesters. In the initial-state of the energy-harvesting, the beams\' free-end is near the cold-side. Thus, the soft-magnet is cooled lower than its curie temperature (Tc) and consequently changed from paramagnetic to ferromagnetic. Therefore, a magnetic-attractive force is produced between the soft-magnet and hard-magnet. Consequently, the beams/soft-magnet are down-pulled toward the hard-magnet fixed on the hot-side. The soft-magnet closing to the hot-side is heated higher than its Tc and subsequently changed to paramagnetic. Consequently, the magnetic-force is eliminated thus the beams are rebounded to the initial-state. Hence, when the harvester is under a temperature-difference, the beams\' pulling-down/back process is cyclic. Due to the piezoelectric effect, the piezoelectric-sheet fixed on the beams continuously produces voltage-response. Under the temperature-difference of 29 C, the voltage-response of the harvester is 30.4 mV with an oscillating-frequency of 0.098 Hz.
URI: http://hdl.handle.net/11536/24774
http://dx.doi.org/10.1117/12.2045294
ISBN: 978-0-8194-9983-7
ISSN: 0277-786X
DOI: 10.1117/12.2045294
期刊: ACTIVE AND PASSIVE SMART STRUCTURES AND INTEGRATED SYSTEMS 2014
Volume: 9057
Appears in Collections:Conferences Paper


Files in This Item:

  1. 000339374200031.pdf

If it is a zip file, please download the file and unzip it, then open index.html in a browser to view the full text content.