Optimization of weld bead geometry in the activated GMA welding process via a grey-based Taguchi method

Abstract

We optimized the weld bead geometry of 6061 aluminum alloy welds pre-coated with activating flux before gas metal arc (GMA) welding. In this activated GMA welding process, there were five single component fluxes used in the initial experiment to evaluate the penetration capability of bead-on-plate GMA welds. Based on the higher penetration of weld bead, two single component fluxes were selected to create mixed component flux in next stage. The grey-based Taguchi method was employed to obtain the optimal welding parameters that were considered with multiple quality characteristics such as penetration, depth-to-width ratio (DWR) and fusion area of GMA welds. The experimental procedure of the proposed approach not only increases penetration of 6061 aluminum alloy welds, but also improves the DWR and fusion area of GMA butt-joint welds simultaneously.