標題: Fabricating embedded SU-8 microstructures with asymmetric inside cross section by double-side multiple partial exposure method
作者: Huang, Yuan-Te
Hsu, Wensyang
交大名義發表
機械工程學系
National Chiao Tung University
Department of Mechanical Engineering
關鍵字: 3D microstructure;Embedded;SU-8;Double-side exposure;Partial exposure
公開日期: 1-六月-2014
摘要: Here a double-side multiple partial exposure (DoMPE) method is proposed to fabricate an embedded SU8 microstructure with more flexible inside cross section. The proposed method uses standard lithography equipment and needs only single-layer coating of negative photoresist SU-8 on glass substrate without bonding process. Process parameters, including development thickness at different front and back-side partial exposure doses, are experimentally characterized. Reflection effect due to Cr layer on glass substrate is shown to have influence on the development depth of SU-8 in front partial exposure. It is found that coating thicker SU-8 not only can reduce reflection effect, but also can attenuate cross-link effect due to exposure dose accumulation on SU-8 from both front and back sides. Finally, an embedded SU-8 microstructure is demonstrated to verify that the proposed DoMPE method needs only single-layer SU-8 coating to fabricate not just embedded microstructures, but also embedded microstructure with asymmetric inside cross section. (C) 2014 Elsevier B.V. All rights reserved.
URI: http://dx.doi.org/10.1016/j.mee.2014.03.022
http://hdl.handle.net/11536/25243
ISSN: 0167-9317
DOI: 10.1016/j.mee.2014.03.022
期刊: MICROELECTRONIC ENGINEERING
Volume: 121
Issue: 
起始頁: 64
結束頁: 67
顯示於類別:期刊論文


文件中的檔案:

  1. 000341471500016.pdf

若為 zip 檔案,請下載檔案解壓縮後,用瀏覽器開啟資料夾中的 index.html 瀏覽全文。